In this review, we will be comparing YU2 and YU6, two Powered Bookshelf speakers by Kanto Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Kanto YU2 and Kanto YU6 first before getting into our more
detailed comparison.
Kanto YU2 Key Specs
- 2-way Design
- 50-watt RMS( 100-watt Peak) Integrated Amplifier
- 0.75" Soft-Dome Tweeter
- 3" Kevlar Woofer
- 80-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Weight:1.30kg
- Dimensions (H x W x D): 150.0" x 3.9" x 5.3"( 150.0 x 100.0 x 135.0mm )
Kanto YU6 Key Specs
- 2-way Design
- 100-watt RMS Integrated Amplifier
- 1" Soft-Dome Tweeter
- 5.25" Kevlar Woofer
- 50-20k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Weight:4.00kg
- Dimensions (H x W x D): 272.0" x 6.9" x 8.1"( 272.0 x 175.0 x 205.0mm )
YU2 and YU6 are members of Kanto's YU Powered series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the Kanto YU2 and Kanto YU6 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both YU2 and YU6 are 2-way speakers.
| Driver |
Kanto YU2 |
Kanto YU6 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 3-inch
|
1 x 5.25-inch
|
YU2 features a 0.75" Silk Soft-Dome Tweeter and 1 x 3" Kevlar Woofer . On the other hand, the YU6 features a 1" Silk Soft-Dome Tweeter and 1 x 5.25" Kevlar Woofer .
Frequency Response
YU2 has a frequency range of 80-20k Hz whereas YU6 has a frequency range of 50-20k Hz. With a minimum frequency of 50Hz, the YU6 can go significantly deeper on the low side and provide stronger bass compared to the YU2's min frequency of 80Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both YU2 and YU6 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Kanto YU2's and Kanto YU6's external dimensions. Kanto YU2 has external dimensions of 150.0 x 100.0 x 135.0mm ( 5.90 x 3.9 x 5.3inch) whereas Kanto YU6 has external dimensions of 272.0 x 175.0 x 205.0mm ( 10.7 x 6.9 x 8.1inch) .
Kanto YU6 is clearly the larger of the two speakers. Its body is 75mm wider, 122mm taller and 70mm deeper than Kanto YU2.
Below you can see the front view size comparison of Kanto YU2 and Kanto YU6 in scale.
Comparison image of Kanto YU2 and Kanto YU6 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Kanto YU2 is approximately 135.0cm2 / 20.9inch2 and base area of the Kanto YU6 is approximately 358.8cm2 / 55.6inch2. The YU2 requires 62% less surface area than the YU6 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Kanto YU2 and Kanto YU6 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Kanto YU2 weighs 1.30kg / 2.9lbs and the Kanto YU6 weighs 4.00kg / 8.8lbs. This makes the YU6 208% heavier than the YU2.
Here is a comparison of how YU2 and YU6's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Kanto YU2?
Here are the items that are included inside the box of YU2:
Power Cord Speaker Wire (10-feet) USB DAC Cable 3.5mm Auxiliary Cable (6.5-feet) 8 x Rubber Feet Manual
What's in the Box of Kanto YU6?
Here are the items that come with the YU6:
Remote with Batteries Power Cord Speaker Wire (16′) 3.5mm Auxiliary Cable (6.5′) 8 x Rubber Feet Manual