In this review, we will be comparing two different type of speakers by JBL. JBL Stage A135C is a Center Channel speaker whereas the A180 is a Floor-standing speaker.
Let's have a brief look at the main features
of JBL Stage A135C and JBL Stage A180 first before getting into our more
detailed comparison.
JBL Stage A135C Key Specs
- 2-way Design
- 1" dome with HDI (High Definition Imaging) waveguide technology Tweeter
- 6 x 3" polycellulose Woofer
- 75-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 6ohms
- Power Range:20-150watts
- Weight:7.46kg
- Dimensions (H x W x D): 105.0" x 29-3/8" x 7-5/16"( 105.0 x 747.0 x 186.0mm )
JBL Stage A180 Key Specs
- 2-way Design
- 1" HDI (High Definition Imaging) waveguide Tweeter
- 2 x 6.5" Polycellulose Woofer
- 40-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 6ohms
- Power Range:20-225watts
- Weight:17.29kg
- Dimensions (H x W x D): 1045.0" x 12" x 14-1/2"( 1045.0 x 305.0 x 369.0mm )
A135C and A180 are members of JBL's Stage series of speakers. Below you can find the loudspeakers from this series.
What size room are the JBL Stage A135C and JBL Stage A180 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
JBL Stage A135C |
JBL Stage A180 |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the JBL Stage A135C and JBL Stage A180 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both A135C and A180 are 2-way speakers.
| Driver |
JBL Stage A135C |
JBL Stage A180 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
6 x 3-inch
|
2 x 6.5-inch
|
A135C features a 1" aluminum dome with HDI (High Definition Imaging) waveguide technology Tweeter and 6 x 3" polycellulose Woofer . On the other hand, the A180 features a 1" aluminum HDI (High Definition Imaging) waveguide Tweeter and 2 x 6.5" Polycellulose Woofer .
Frequency Response
A135C has a frequency range of 75-40k Hz whereas A180 has a frequency range of 40-40k Hz. With a minimum frequency of 40Hz, the A180 can go significantly deeper on the low side and provide stronger bass compared to the A135C's min frequency of 75Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
A135C and A180 have the same Impedance of 6 ohms and their sensitivity is also same at 90 dB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
A135C can handle a max power of 225 watts RMS from the amp the whereas A135C has a max power handling value of 150 watts RMS , 75 watts less than the A180.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
A180 features 5-Way post posts which make bi-amping or bi-wiring possible. A135C has a 5-way post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Stage A135C's and JBL Stage A180's external dimensions. JBL Stage A135C has external dimensions of 105.0 x 747.0 x 186.0mm ( 4-1/8 x 29-3/8 x 7-5/16inch) whereas JBL Stage A180 has external dimensions of 1045.0 x 305.0 x 369.0mm ( 41-1/8 x 12 x 14-1/2inch) .
JBL Stage A135C is 940mm shorter and 183mm less deeper than JBL Stage A180 but it is also 442mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL Stage A135C is approximately 1389.4cm2 / 215.4inch2 and base area of the JBL Stage A180 is approximately 1125.5cm2 / 174.5inch2. The A135C requires 23% more surface area than the A180 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of JBL Stage A135C?
Here are the items that are included inside the box of A135C:
Center-channel loudspeakerGrille4 Leveling feet4 Rubber feetOwners ManualWarranty Card
What's in the Box of JBL Stage A180?
Here are the items that come with the A180:
Floorstanding loudspeakerGrille4 Outriggers4 Rubber feet4 Spikes8 Screws2 Terminal jumpers (pre-installed)Owners ManualWarranty Card
Number of Woofers 
Height 
Price per pair* 
Max Input Power 
Bi-Amping and Bi-Wiring 
Base Surface Area