In this review, we will be comparing two different type of speakers by JBL. JBL Stage A180 is a Floor-standing speaker whereas the Stage 250WL is a In-wall speaker.
Let's have a brief look at the main features
of JBL Stage A180 and JBL Stage 250WL first before getting into our more
detailed comparison.
JBL Stage A180 Key Specs
- 2-way Design
- 1" HDI (High Definition Imaging) waveguide Tweeter
- 2 x 6.5" Polycellulose Woofer
- 40-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 6ohms
- Power Range:20-225watts
- Weight:17.29kg
- Dimensions (H x W x D): 1045.0" x 12" x 14-1/2"( 1045.0 x 305.0 x 369.0mm )
JBL Stage 250WL Key Specs
- 2-way Design
- 1" Horn-Loaded Tweeter
- 2 x 5.25" Polycellulose Woofer
- 52-25kHz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-120watts
- Dimensions (H x W x D): 461.0" x 6.3750" x 3.8125"( 461.0 x 162.0 x 97.0mm )
A180 and Stage 250WL are members of JBL's Stage series of speakers. Below you can find the loudspeakers from this series.
What size room are the JBL Stage A180 and JBL Stage 250WL speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
JBL Stage A180 |
JBL Stage 250WL |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the JBL Stage A180 and JBL Stage 250WL compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both A180 and Stage 250WL are 2-way speakers.
| Driver |
JBL Stage A180 |
JBL Stage 250WL |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 5.25-inch
|
A180 features a 1" aluminum HDI (High Definition Imaging) waveguide Tweeter and 2 x 6.5" Polycellulose Woofer . On the other hand, the Stage 250WL features a 1" Horn-Loaded Tweeter and 2 x 5.25" Polycellulose Woofer .
Frequency Response
A180 has a frequency range of 40-40k Hz whereas Stage 250WL has a frequency range of 52-25kHz. With a minimum frequency of 40Hz, the A180 can go significantly deeper on the low side and provide stronger bass compared to the Stage 250WL's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
A180 is a 6 ohms speaker compared to the Stage 250WL which has a nominal impedance of 8 ohms.
On the other hand, they have the same sensitivity of 90 dBdB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
A180 can handle a max power of 225 watts RMS from the amp the whereas Stage 250WL has a max power handling value of 120 watts RMS, 105 watts less than the A180.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
A180 features 5-Way post posts which make bi-amping or bi-wiring possible. Stage 250WL has a Spring post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Stage A180's and JBL Stage 250WL's external dimensions. JBL Stage A180 has external dimensions of 1045.0 x 305.0 x 369.0mm ( 41-1/8 x 12 x 14-1/2inch) whereas JBL Stage 250WL has external dimensions of 461.0 x 162.0 x 97.0mm ( 18.1250-inch x 6.3750-inch x 3.8125-inch) .
JBL Stage A180 is clearly the larger of the two speakers. Its body is 143mm wider, 584mm taller and 272mm deeper than JBL Stage 250WL.
What's in the Box of JBL Stage A180?
Here are the items that are included inside the box of A180:
Floorstanding loudspeakerGrille4 Outriggers4 Rubber feet4 Spikes8 Screws2 Terminal jumpers (pre-installed)Owners ManualWarranty Card
What's in the Box of JBL Stage 250WL?
Here are the items that come with the Stage 250WL:
In-wall loudspeakerGrilleCut-Out TemplateQuick Start Guide
Max Input Power 
Woofer Size 
High Frequency Response 
Bi-Amping and Bi-Wiring 
Nominal Impedance 
Height 
Base Surface Area 
Price per pair*