In this review, we will be comparing Vestia No2 and Vestia No2, two Passive Floor-standing speakers by Focal Let's have a brief look at the main features
of Focal Vestia No2 and Focal Vestia No2 first before getting into our more
detailed comparison.
Vestia No2 and Vestia No2 are members of Focal's Vestia series of speakers. Below you can find the loudspeakers from this series.
Focal Vestia Series History
What size room are the Focal Vestia No2 and Focal Vestia No2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Vestia No2 and Focal Vestia No2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vestia No2 and Vestia No2 are 3-way speakers.
Driver |
Focal Vestia No2 |
Focal Vestia No2 |
Driver Setup
|
3-way
|
3-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
1 x 6.5-inch |
1 x 6.5-inch |
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
Vestia No2 features a 1" Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Slatefiber Woofer with a Crossover frequency at 280Hz and 2800Hz. On the other hand, the Vestia No2 features a 1" Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Slatefiber Woofer with a Crossover frequency at 280Hz and 2800Hz.
Frequency Response
Vestia No2 and Vestia No2 has exactly the same frequency range of 47-30k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vestia No2 and Vestia No2 have the same Impedance of 8 ohms and their sensitivity is also same at 92 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Vestia No2 and Vestia No2 has the same power range of 40-250 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both Vestia No2 and Vestia No2 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Vestia No2's and Focal Vestia No2's external dimensions. Focal Vestia No2 has external dimensions of 1013.0 x 258.0 x 372.0mm ( 39-7/8-inch x 10-1/8-inch x 14-5/8-inch) whereas Focal Vestia No2 has external dimensions of 1013.0 x 258.0 x 372.0mm ( 39-7/8-inch x 10-1/8-inch x 14-5/8-inch) .
In this case, we can see that Focal Vestia No2 and Focal Vestia No2 have the exact same height, width and thickness.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Vestia No2 is approximately 959.8cm2 / 148.8inch2 and base area of the Focal Vestia No2 is approximately 959.8cm2 / 148.8inch2.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Vestia No2 weighs 22.00kg / 48.4lbs and the Focal Vestia No2 weighs 22.00kg / 48.4lbs.
Here is a comparison of how Vestia No2 and Vestia No2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
General |
Focal Vestia No2 |
Focal Vestia No2 |
Brand |
Focal |
Focal |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
40-250 watts |
40-250 watts |
Sensitivity |
91.5 dB |
91.5 dB |
Impedance |
8 ohms |
8 ohms |
Impedance |
3.0 ohms |
3.0 ohms |
Frequency Response |
47-30k Hz |
47-30k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
6.5" |
6.5" |
Woofer Composition |
Slatefiber |
Slatefiber |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
inverted dome |
inverted dome |
Aimable Tweeter |
No |
No |
Midrange Driver |
6.5" |
6.5" |
Crossover Frequency |
280Hz and 2800Hz |
280Hz and 2800Hz |
Firing Direction |
front |
front |
Physical Specs |
|
|
Height |
1013.0mm (39.9") |
1013.0mm (39.9") |
Width |
258.0mm (10.2") |
258.0mm (10.2") |
Depth |
372.0mm (14.6") |
372.0mm (14.6") |
Weight |
22.00kg (48.4lbs) |
22.00kg (48.4lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF |
MDF |
Available Colors |
Black High Gloss, Dark Wood, Light Wood |
Black High Gloss, Dark Wood, Light Wood |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
No |
No |
Other |
|
|
Parts Warranty |
|
|
Labor Warranty |
|
|