In this review, we will be comparing two different type of speakers by Emotiva. Emotiva Airmotiv T-Zero+ is a Floor-standing speaker whereas the Airmotiv C1+ is a Center Channel speaker.
Let's have a brief look at the main features
of Emotiva Airmotiv T-Zero+ and Emotiva Airmotiv C1+ first before getting into our more
detailed comparison.
Airmotiv T-Zero+ and Airmotiv C1+ are members of Emotiva's Airmotiv series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv Series History
What size room are the Emotiva Airmotiv T-Zero+ and Emotiva Airmotiv C1+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv T-Zero+ and Emotiva Airmotiv C1+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Airmotiv T-Zero+ is a 2-way design whereas the Airmotiv C1+ is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Emotiva Airmotiv T-Zero+ |
Emotiva Airmotiv C1+ |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
- |
1 x 3-inch |
|
Woofer
|
2 x 5.25-inch
|
2 x 5.25-inch
|
Airmotiv T-Zero+ features a 25×32 mm" folded ribbon Tweeter and 2 x 5.25" woven fiber cone Woofer with a Crossover frequency at 2500Hz. On the other hand, the Airmotiv C1+ features a 25×32 mm" folded ribbon Tweeter , a 3" Midrange and 2 x 5.25" woven fiber cone Woofer with a Crossover frequency at 550 Hz and 2600Hz.
Frequency Response
Airmotiv T-Zero+ has a frequency range of 48-28 kHz whereas Airmotiv C1+ has a frequency range of 50 Hz – 28 kHz. With a minimum frequency of 48Hz, the Airmotiv T-Zero+ can go slightly deeper then the Airmotiv C1+'s min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv T-Zero+ and Airmotiv C1+ have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Airmotiv T-Zero+ sensitivity is rated at 87 dB and the Airmotiv C1+'s is at 89 dB. This 2 dB difference makes the Emotiva Airmotiv C1+ a more sensitive speaker compared to Emotiva Airmotiv T-Zero+, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv T-Zero+ and the Airmotiv T-Zero+ can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv T-Zero+ can handle a max power of 120 watts RMS from the amp the whereas Airmotiv T-Zero+ has a max power handling value of 100 watts RMS , 20 watts less than the Airmotiv C1+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both Airmotiv T-Zero+ and Airmotiv C1+ have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv T-Zero+'s and Emotiva Airmotiv C1+'s external dimensions. Emotiva Airmotiv T-Zero+ has external dimensions of 969.0 x 969.0 x 267.0mm ( 38-1/8 x 38-1/8 x 10-1/2inch) whereas Emotiva Airmotiv C1+ has external dimensions of 197.0 x 521.0 x 210.0mm ( 7-3/4 x 20-1/2 x 8-1/4inch) .
Emotiva Airmotiv T-Zero+ is clearly the larger of the two speakers. Its body is 448mm wider, 772mm taller and 57mm deeper than Emotiva Airmotiv C1+.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv T-Zero+ is approximately 2587.2cm2 / 401.0inch2 and base area of the Emotiva Airmotiv C1+ is approximately 1094.1cm2 / 169.6inch2. The Airmotiv T-Zero+ requires 136% more surface area than the Airmotiv C1+ which gives it a small disadvantage on placement in tight spaces.