In this review, we will be comparing two different type of speakers by Emotiva. Emotiva Airmotiv C3+ is a Center Channel speaker whereas the Airmotiv T-Zero+ is a Floor-standing speaker.
Let's have a brief look at the main features
of Emotiva Airmotiv C3+ and Emotiva Airmotiv T-Zero+ first before getting into our more
detailed comparison.
Airmotiv C3+ and Airmotiv T-Zero+ are members of Emotiva's Airmotiv series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv Series History
What size room are the Emotiva Airmotiv C3+ and Emotiva Airmotiv T-Zero+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv C3+ and Emotiva Airmotiv T-Zero+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Airmotiv C3+ is a 3-way design whereas the Airmotiv T-Zero+ is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Emotiva Airmotiv C3+ |
Emotiva Airmotiv T-Zero+ |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
2 x 5.25-inch |
- |
|
Woofer
|
4 x 6.5-inch
|
2 x 5.25-inch
|
Airmotiv C3+ features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 4 x 6.5" woven fiber cone Woofer with a Crossover frequency at 350 Hz and 2800Hz. On the other hand, the Airmotiv T-Zero+ features a 25×32 mm" folded ribbon Tweeter and 2 x 5.25" woven fiber cone Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Airmotiv C3+ has a frequency range of 40 Hz – 28 kHz whereas Airmotiv T-Zero+ has a frequency range of 48-28 kHz. With a minimum frequency of 40Hz, the Airmotiv C3+ can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv T-Zero+'s min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv C3+ and Airmotiv T-Zero+ have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Airmotiv C3+ sensitivity is rated at 92 dB and the Airmotiv T-Zero+'s is at 87 dB. This 5 dB difference makes the Emotiva Airmotiv C3+ a more sensitive speaker compared to Emotiva Airmotiv T-Zero+, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv C3+ and the Airmotiv C3+ can provide this impedance level.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Airmotiv C3+ can handle a max power of 200 watts RMS from the amp the whereas Airmotiv T-Zero+ has a max power handling value of 100 watts RMS, 100 watts less than the Airmotiv C3+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both Airmotiv C3+ and Airmotiv T-Zero+ have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Emotiva Airmotiv C3+ double Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv C3+'s and Emotiva Airmotiv T-Zero+'s external dimensions. Emotiva Airmotiv C3+ has external dimensions of 220.0 x 1391.0 x 312.0mm ( 8-5/8-inch x 54-3/4-inch x 12-1/4-inch) whereas Emotiva Airmotiv T-Zero+ has external dimensions of 969.0 x 969.0 x 267.0mm ( 38-1/8 x 38-1/8 x 10-1/2inch) .
Emotiva Airmotiv T-Zero+ is 422mm narrower and 45mm less deeper than Emotiva Airmotiv C3+ but it is also 749mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv C3+ is approximately 4339.9cm2 / 672.7inch2 and base area of the Emotiva Airmotiv T-Zero+ is approximately 2587.2cm2 / 401.0inch2. The Airmotiv C3+ requires 68% more surface area than the Airmotiv T-Zero+ which gives it a small disadvantage on placement in tight spaces.