In this review, we will be comparing two different type of speakers by DALI. DALI Opticon 2 MK2 is a Bookshelf speaker whereas the Opticon 8 MK2 is a Floor-standing speaker.
Let's have a brief look at the main features
of DALI Opticon 2 II and DALI Opticon 8 II first before getting into our more
detailed comparison.
DALI Opticon 2 II Key Specs
- 2-way Design
- 1.125" Soft-Dome Tweeter
- 6.5" Wood Fiber Woofer
- 59-25k Hz Frequency Response
- 86.5 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-150watts
- Weight:7.73kg
- Dimensions (H x W x D): 351.0" x 7-11/16" x 11-11/16"( 351.0 x 196.0 x 297.0mm )
DALI Opticon 8 II Key Specs
- 3-way Design
- 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter
- 6.5" Midrange
- 2 x 8" Wood Fiber Woofer
- 6.5" Midrange
- 38-30k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:40-300watts
- Weight:37.10kg
- Dimensions (H x W x D): 1150.0" x 9-1/2" x 18-1/16"( 1150.0 x 245.0 x 459.0mm )
Opticon 2 MK2 and Opticon 8 MK2 are members of DALI's Opticon Mark II series of speakers. Below you can find the loudspeakers from this series.
DALI Opticon Mark II Series History
What size room are the DALI Opticon 2 II and DALI Opticon 8 II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
DALI Opticon 2 II |
DALI Opticon 8 II |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the DALI Opticon 2 II and DALI Opticon 8 II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Opticon 2 MK2 is a 2-way design whereas the Opticon 8 MK2 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
DALI Opticon 2 II |
DALI Opticon 8 II |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.125-inch
|
17 x 45 mm ribbon + 1.125-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
1 x 6.5-inch
|
2 x 8-inch
|
Opticon 2 MK2 features a 1.125" Soft-Dome Tweeter and 1 x 6.5" Wood Fiber Woofer with a Crossover frequency at 2000Hz. On the other hand, the Opticon 8 MK2 features a 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter , a 6.5" Midrange and 2 x 8" Wood Fiber Woofer with a Crossover frequency at 380Hz, 2200Hz and 14,000Hz.
Frequency Response
Opticon 2 MK2 has a frequency range of 59-25k Hz whereas Opticon 8 MK2 has a frequency range of 38-30k Hz. With a minimum frequency of 38Hz, the Opticon 8 MK2 can go significantly deeper on the low side and provide stronger bass compared to the Opticon 2 MK2's min frequency of 59Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Opticon 2 MK2 and Opticon 8 MK2 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Opticon 2 MK2 sensitivity is rated at 86.5 dB and the Opticon 8 MK2's is at 88 dB. This 1 dB difference makes the DALI Opticon 8 II a more sensitive speaker compared to DALI Opticon 2 II, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Opticon 2 MK2 and the Opticon 2 MK2 can provide this impedance level.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Opticon 2 MK2 can handle a max power of 300 watts RMS from the amp the whereas Opticon 2 MK2 has a max power handling value of 150 watts RMS , 150 watts less than the Opticon 8 MK2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Opticon 8 MK2 features Post posts which make bi-amping or bi-wiring possible. Opticon 2 MK2 has a Post which doesn't feature bi-amping/bi-wiring.
DALI Opticon 2 II's Post terminals
DALI Opticon 8 II's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Opticon 2 MK2 and Opticon 8 MK2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
DALI Opticon 2 II Port
DALI Opticon 8 II Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Opticon 2 II's and DALI Opticon 8 II's external dimensions. DALI Opticon 2 II has external dimensions of 351.0 x 196.0 x 297.0mm ( 13-13/16 x 7-11/16 x 11-11/16inch) whereas DALI Opticon 8 II has external dimensions of 1150.0 x 245.0 x 459.0mm ( 45-1/4 x 9-1/2 x 18-1/16inch) .
DALI Opticon 8 II is clearly the larger of the two speakers. Its body is 49mm wider, 799mm taller and 162mm deeper than DALI Opticon 2 II.
Below you can see the front view size comparison of DALI Opticon 2 II and DALI Opticon 8 II in scale.
Comparison image of DALI Opticon 2 II and DALI Opticon 8 II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Opticon 2 II is approximately 582.1cm2 / 90.2inch2 and base area of the DALI Opticon 8 II is approximately 1124.6cm2 / 174.3inch2. The Opticon 2 MK2 requires 48% less surface area than the Opticon 8 MK2 which gives it a small advantage on placement in tight spaces.
What's in the Box of DALI Opticon 2 II?
Here are the items that are included inside the box of Opticon 2 MK2:
Bookshelf loudspeakerGrille4 Rubber feetQuick Start GuideCongratulations Card
What's in the Box of DALI Opticon 8 II?
Here are the items that come with the Opticon 8 MK2:
Floorstanding loudspeakerGrille2 Binding post jumpers (pre-installed)4 Outrigger feet4 Spikes (with lock nuts)4 Rubber pads4 ScrewsHex-keyWrenchQuick Start GuideCongratulations Card
Height 
Base Surface Area 
Price per pair* 
Max Input Power 
Driver Setup 
Sensitivity 
Woofer Size 
High Frequency Response 
Bi-Amping and Bi-Wiring