In this review, we will be comparing two different type of speakers by DALI. DALI Oberon Vokal is a Center Channel speaker whereas the Oberon 1 is a Bookshelf speaker.
Let's have a brief look at the main features
of DALI Oberon Vokal and DALI Oberon 1 first before getting into our more
detailed comparison.
Oberon Vokal and Oberon 1 are members of DALI's Oberon series of speakers. Below you can find the loudspeakers from this series.
DALI Oberon Series History
What size room are the DALI Oberon Vokal and DALI Oberon 1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the DALI Oberon Vokal and DALI Oberon 1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Oberon Vokal and Oberon 1 are 2-way speakers.
| Driver |
DALI Oberon Vokal |
DALI Oberon 1 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-1/8-inch
|
1.125-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
1 x 5.25-inch
|
Oberon Vokal features a 1-1/8" ultra-light soft textile Soft-Dome Tweeter and 2 x 5.25" Wood Fiber Woofer with a Crossover frequency at 2600Hz. On the other hand, the Oberon 1 features a 1.125" Soft-Dome Tweeter and 1 x 5.25" Wood Fiber Woofer with a Crossover frequency at 2800Hz.
Frequency Response
Oberon Vokal has a frequency range of 47-26k Hz whereas Oberon 1 has a frequency range of 51-26k Hz. With a minimum frequency of 47Hz, the Oberon Vokal can go slightly deeper then the Oberon 1's min frequency of 51Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Oberon Vokal is a 4 ohms speaker compared to the Oberon 1 which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Oberon Vokal can provide this impedance level.
These two speakers also have different sensitivity levels. Oberon Vokal sensitivity is rated at 89.5 dB and the Oberon 1's is rated at 86 dB. This 4 dB difference makes the DALI Oberon Vokal a more sensitive speaker compared to DALI Oberon 1, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Oberon Vokal can handle a max power of 150 watts RMS from the amp the whereas Oberon 1 has a max power handling value of 100 watts RMS, 50 watts less than the Oberon Vokal.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Oberon Vokal features Post type posts and Oberon 1 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
DALI Oberon Vokal's Binding post terminals
DALI Oberon 1's Post terminals
Cabinet Type and Port Position
Oberon Vokal has a front firing port whereas Oberon 1 has a rear firing ports. DALI Oberon Vokal's front-firing port gives more flexibility in placement in regards to proximity to walls compared to DALI Oberon 1 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Oberon Vokal's and DALI Oberon 1's external dimensions. DALI Oberon Vokal has external dimensions of 162.0 x 443.0 x 294.0mm ( 6-3/8 x 17-7/16 x 11-9/16inch) whereas DALI Oberon 1 has external dimensions of 275.0 x 164.0 x 228.0mm ( 10-13/16 x 6-7/16 x 8-15/16inch) .
DALI Oberon 1 is 279mm narrower and 66mm less deeper than DALI Oberon Vokal but it is also 113mm taller.
Below you can see the front view size comparison of DALI Oberon Vokal and DALI Oberon 1 in scale.
Comparison image of DALI Oberon Vokal and DALI Oberon 1 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Oberon Vokal is approximately 1302.4cm2 / 201.9inch2 and base area of the DALI Oberon 1 is approximately 373.9cm2 / 58.0inch2. The Oberon Vokal requires 248% more surface area than the Oberon 1 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of DALI Oberon Vokal?
Here are the items that are included inside the box of Oberon Vokal:
Center-channel loudspeaker Grille 8 Rubber feet Manual
What's in the Box of DALI Oberon 1?
Here are the items that come with the Oberon 1:
2 Bookshelf loudspeakers2 Grilles8 Rubber bumpersManual