In this review, we will be comparing NS-SW100 and R-100SW, two Powered Subwoofer speakers from Yamaha and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Yamaha NS-SW100 and Klipsch R-100SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Yamaha NS-SW100and Klipsch R-100SW have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
NS-SW100 has a frequency range of 25-180 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 25Hz, the NS-SW100 can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Yamaha NS-SW100 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Yamaha NS-SW100's and Klipsch R-100SW's external dimensions. Yamaha NS-SW100 has external dimensions of 352.4 x 352.4 x 409.6mm (13.875 x 13.875 x 16.125inch) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm (14-5/8 x 12-9/16 x 18-1/16inch).
Yamaha NS-SW100 is 19.6mm shorter and 49.4mm less deeper than Klipsch R-100SW but it is also 32.4mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Yamaha NS-SW100 is approximately 1443.4cm2 / 223.7inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The NS-SW100 requires 2% less surface area than the R-100SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Yamaha NS-SW100 weighs 12.02kg / 26.4lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the NS-SW100 10% heavier than the R-100SW.
Here is a comparison of how NS-SW100 and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Low Frequency Response |
25 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
180k Hz
vs
120k Hz
|
Generates higher frequency |
 Height |
352mm
vs
372mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1443cm2
vs
1468cm2
|
Takes less floor space |
 Price per pair* |
270USD
vs
275USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Yamaha NS-SW100 |
Klipsch R-100SW |
| Brand |
Yamaha |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
50 watts |
150 watts |
| Frequency Response |
25-180 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
50-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
100-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Cone |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
352.4mm (13.9") |
372.0mm (14.6") |
| Width |
352.4mm (13.9") |
320.0mm (12.6") |
| Depth |
409.6mm (16.1") |
459.0mm (18.1") |
| Weight |
12.02kg (26.4lbs) |
10.91kg (24lbs) |
| Enclosure |
Bass Reflex |
Bass reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |