In this review, we will be comparing SB-2000 Pro and R-100SW, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS SB-2000 Pro and Klipsch R-100SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS SB-2000 Proand Klipsch R-100SW have a single woofer setup however the SVS SB-2000 Pro's woofer is 12-inch whereas the Klipsch R-100SW features a 10-inch woofer.
Frequency Response
SB-2000 Pro has a frequency range of 19-240 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 19Hz, the SB-2000 Pro can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS SB-2000 Pro has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS SB-2000 Pro's and Klipsch R-100SW's external dimensions. SVS SB-2000 Pro has external dimensions of 370.0 x 361.0 x 434.0mm (14-9/16 x 14-3/16 x 17-1/16inch) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm (14-5/8 x 12-9/16 x 18-1/16inch).
SVS SB-2000 Pro is 2mm shorter and 25mm less deeper than Klipsch R-100SW but it is also 41mm wider.
Below you can see the front view size comparison of SVS SB-2000 Pro and Klipsch R-100SW in scale.
Comparison image of SVS SB-2000 Pro and Klipsch R-100SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS SB-2000 Pro is approximately 1566.7cm2 / 242.8inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The SB-2000 Pro requires 7% more surface area than the R-100SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS SB-2000 Pro weighs 17.55kg / 38.6lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the SB-2000 Pro 61% heavier than the R-100SW.
Here is a comparison of how SB-2000 Pro and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS SB-2000 Pro?
Here are the items that are included inside the box of SB-2000 Pro:
- Powered subwoofer
- Grille
- 8-feet AC power cord
- Quick Start Guide
- Safety Instructions
- SVS brochure
What's in the Box of Klipsch R-100SW?
Here are the items that come with the R-100SW:
- Powered sub
- Grille (installed)
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
19 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
240k Hz
vs
120k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
370mm
vs
372mm
|
Easier to fit in smaller spaces |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Base Surface Area |
1468cm2
vs
1566cm2
|
Takes less floor space |
 Price per pair* |
275USD
vs
900USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS SB-2000 Pro |
Klipsch R-100SW |
| Brand |
SVS |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
550 watts |
150 watts |
| Frequency Response |
19-240 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
550-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
1500-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Aluminum |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
370.0mm (14.6") |
372.0mm (14.6") |
| Width |
361.0mm (14.2") |
320.0mm (12.6") |
| Depth |
434.0mm (17.1") |
459.0mm (18.1") |
| Weight |
17.55kg (38.6lbs) |
10.91kg (24lbs) |
| Enclosure |
Acoustic Suspension |
Bass reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |