In this review, we will be comparing PB-3000 and R-100SW, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 and Klipsch R-100SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-3000 and Klipsch R-100SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-3000and Klipsch R-100SW have a single woofer setup however the SVS PB-3000's woofer is 13-inch whereas the Klipsch R-100SW features a 10-inch woofer.
Frequency Response
PB-3000 has a frequency range of 16-200 Hz whereas R-100SW has a frequency range of 32-120 Hz. With a minimum frequency of 16Hz, the PB-3000 can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-3000 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Klipsch R-100SW have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000's and Klipsch R-100SW's external dimensions. SVS PB-3000 has external dimensions of 558.0 x 466.0 x 661.0mm ( 21-15/16 x 18-5/16 x 26inch) whereas Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) .
SVS PB-3000 is clearly the larger of the two speakers. Its body is 146mm wider, 186mm taller and 202mm deeper than Klipsch R-100SW.
Below you can see the front view size comparison of SVS PB-3000 and Klipsch R-100SW in scale.
Comparison image of SVS PB-3000 and Klipsch R-100SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 is approximately 3080.3cm2 / 477.4inch2 and base area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2. The PB-3000 requires 110% more surface area than the R-100SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-3000 weighs 37.36kg / 82.2lbs and the Klipsch R-100SW weighs 10.91kg / 24lbs. This makes the PB-3000 242% heavier than the R-100SW.
Here is a comparison of how PB-3000 and R-100SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-3000?
Here are the items that are included inside the box of PB-3000:
Powered subwooferGrille6.5-feet AC power cordQuick Start GuideOnline Registration CardSVS brochure
What's in the Box of Klipsch R-100SW?
Here are the items that come with the R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
 Woofer Size |
13 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
120k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
372mm
vs
558mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1468cm2 (320x459mm)
vs
3080cm2 (466x661mm)
|
Takes less floor space |
 Price per pair* |
275USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS PB-3000 |
Klipsch R-100SW |
| Brand |
SVS |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
800 watts |
150 watts |
| Frequency Response |
16-200 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
800-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
2500-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
13" |
10" |
| Woofer Composition |
Aluminum |
Copper-spun IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
558.0mm (22") |
372.0mm (14.6") |
| Width |
466.0mm (18.3") |
320.0mm (12.6") |
| Depth |
661.0mm (26") |
459.0mm (18.1") |
| Weight |
37.36kg (82.2lbs) |
10.91kg (24lbs) |
| Enclosure |
Bass Reflex |
Bass reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |