In this review, we will be comparing Black TreVoce 12 PRO and SPL-100, two Powered Subwoofer speakers from OSD and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of OSD Black TreVoce 12 PRO and Klipsch SPL-100 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both OSD Black TreVoce 12 PROand Klipsch SPL-100 have a single woofer setup however the OSD Black TreVoce 12 PRO's woofer is 12-inch whereas the Klipsch SPL-100 features a 10-inch woofer.
Frequency Response
Black TreVoce 12 PRO has a frequency range of 18-250 Hz whereas SPL-100 has a frequency range of 27-125 Hz. With a minimum frequency of 18Hz, the Black TreVoce 12 PRO can go significantly deeper on the low side and provide stronger bass compared to the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare OSD Black TreVoce 12 PRO's and Klipsch SPL-100's external dimensions. OSD Black TreVoce 12 PRO has external dimensions of 450.9 x 404.8 x 473.1mm () whereas Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm (16-7/16 x 14-1/16 x 18-13/16inch).
Klipsch SPL-100 is 46.8mm narrower and 32.9mm shorter than OSD Black TreVoce 12 PRO but it is also 4.9mm deeper.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
OSD Black TreVoce 12 PRO needs about 12% more floor or shelf area. OSD Black TreVoce 12 PRO is 33mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the OSD Black TreVoce 12 PRO is approximately 1915.1cm2 / 296.8inch2 and base area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2. The Black TreVoce 12 PRO requires 12% more surface area than the SPL-100 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The OSD Black TreVoce 12 PRO weighs 21.09kg / 46.4lbs and the Klipsch SPL-100 weighs 16.82kg / 37lbs. This makes the Black TreVoce 12 PRO 25% heavier than the SPL-100.
Here is a comparison of how Black TreVoce 12 PRO and SPL-100's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
18 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
250 Hz
vs
125 Hz
|
Generates higher frequency |
 Height |
418mm
vs
450mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1711cm2
vs
1915cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
800USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
OSD Black TreVoce 12 PRO needs about 12% more floor area. OSD Black TreVoce 12 PRO is 33mm taller.
| General |
OSD Black TreVoce 12 PRO |
Klipsch SPL-100 |
| Brand |
OSD |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
18-250 Hz |
27-125 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
450-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
|
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
450.9mm (17.8") |
418.0mm (16.5") |
| Width |
404.8mm (15.9") |
358.0mm (14.1") |
| Depth |
473.1mm (18.6") |
478.0mm (18.8") |
| Weight |
21.09kg (46.4lbs) |
16.82kg (37lbs) |
| Enclosure |
|
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |
A passive radiator subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | OSD Black TreVoce 12 PRO goes deeper - 18Hz against 27Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | OSD Black TreVoce 12 PRO has the bigger amplifier - 300W against 200W RMS, about 1.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | OSD Black TreVoce 12 PRO moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | OSD Black TreVoce 12 PRO is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet; Klipsch SPL-100 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | Klipsch SPL-100 is about 17% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | Klipsch SPL-100 costs less - $399 against $800, about 50% less. |
A OSD Black TreVoce 12 PRO B Klipsch SPL-100
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: OSD Black TreVoce 12 PRO measures better, Klipsch SPL-100 costs about 50% less. In a normal room, placement will make a bigger difference than the gap between these two. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $399 each, two Klipsch SPL-100 cost about $798 against $800 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.