In this review, we will be comparing SPL-100 and SUB3070, two Powered Subwoofer speakers from Klipsch and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch SPL-100 and ELAC SUB3070 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch SPL-100and ELAC SUB3070 have a single woofer setup however the Klipsch SPL-100's woofer is 10-inch whereas the ELAC SUB3070 features a 12-inch woofer.
Frequency Response
SPL-100 has a frequency range of 27-125 Hz whereas SUB3070 has a frequency range of 18-180 Hz. With a minimum frequency of 18Hz, the SUB3070 can go significantly deeper on the low side and provide stronger bass compared to the SPL-100's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch SPL-100 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the ELAC SUB3070 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch SPL-100's and ELAC SUB3070's external dimensions. Klipsch SPL-100 has external dimensions of 418.0 x 358.0 x 478.0mm (16-7/16 x 14-1/16 x 18-13/16inch) whereas ELAC SUB3070 has external dimensions of 435.0 x 520.0 x 477.0mm (17-1/8 x 20-7/16 x 18-3/4inch).
Klipsch SPL-100 is 162mm narrower and 17mm shorter than ELAC SUB3070 but it is also 1mm deeper.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
ELAC SUB3070 needs about 45% more floor or shelf area. ELAC SUB3070 is 17mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch SPL-100 is approximately 1711.2cm2 / 265.2inch2 and base area of the ELAC SUB3070 is approximately 2480.4cm2 / 384.5inch2. The SPL-100 requires 31% less surface area than the SUB3070 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch SPL-100 weighs 16.82kg / 37lbs and the ELAC SUB3070 weighs 35.00kg / 77lbs. This makes the SUB3070 108% heavier than the SPL-100.
Here is a comparison of how SPL-100 and SUB3070's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch SPL-100?
Here are the items that are included inside the box of SPL-100:
- Powered sub
- Grille
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of ELAC SUB3070?
Here are the items that come with the SUB3070:
- Powered subwoofer
- AC power cord
- 2 Steel bottom plates
- 4 Spikes
- 4 Locking-knobs
- 4 Protective discs
- Operating Instructions
 Height |
418mm
vs
435mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1711cm2
vs
2480cm2
|
Takes less floor space |
 Price per pair* |
399USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
18 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
180 Hz
vs
125 Hz
|
Generates higher frequency |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
ELAC SUB3070 needs about 45% more floor area. ELAC SUB3070 is 17mm taller.
| General |
Klipsch SPL-100 |
ELAC SUB3070 |
| Brand |
Klipsch |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
1200 watts |
| Frequency Response |
27-125 Hz |
18-180 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
1200-watt RMS |
| Watts Peak (Max) |
450-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Cerametallic |
Aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
side |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
435.0mm (17.1") |
| Width |
358.0mm (14.1") |
520.0mm (20.5") |
| Depth |
478.0mm (18.8") |
477.0mm (18.8") |
| Weight |
16.82kg (37lbs) |
35.00kg (77lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | ELAC SUB3070 goes deeper - 18Hz against 27Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | ELAC SUB3070 has the bigger amplifier - 1200W against 200W RMS, about 7.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | ELAC SUB3070 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Klipsch SPL-100 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; ELAC SUB3070 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | B | ELAC SUB3070 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Driver placement | depends | Klipsch SPL-100 fires front and ELAC SUB3070 fires side. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | Klipsch SPL-100 is about 34% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Klipsch SPL-100 carries 2 years on parts against 1 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Klipsch SPL-100 costs less - $399 against $999, about 60% less. |
A Klipsch SPL-100 B ELAC SUB3070
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: ELAC SUB3070 measures better, Klipsch SPL-100 costs about 60% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Klipsch SPL-100 will hit harder for the money; if it is mainly for music in a normal-sized room, ELAC SUB3070 is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, ELAC SUB3070 is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.