In this review, we will be comparing R-8SW and R-10SWi, two Powered Subwoofer speakers by Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-8SW and Klipsch R-10SWi first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-8SW and Klipsch R-10SWi compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-8SWand Klipsch R-10SWi have a single woofer setup however the Klipsch R-8SW's woofer is 8-inch whereas the Klipsch R-10SWi features a 10-inch woofer.
Frequency Response
R-8SW has a frequency range of 38-120 Hz whereas R-10SWi has a frequency range of 32-120 Hz. With a minimum frequency of 32Hz, the R-10SWi can go significantly deeper on the low side and provide stronger bass compared to the R-8SW's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Klipsch R-8SW and Klipsch R-10SWi have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Klipsch R-10SWi Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-8SW's and Klipsch R-10SWi's external dimensions. Klipsch R-8SW has external dimensions of 335.0 x 299.0 x 345.0mm ( 13-3/16 x 11-3/4 x 13-9/16inch) whereas Klipsch R-10SWi has external dimensions of 370.0 x 318.0 x 462.0mm ( 14-9/16 x 12-1/2 x 18-3/16inch) .
Klipsch R-10SWi is clearly the larger of the two speakers. Its body is 19mm wider, 35mm taller and 117mm deeper than Klipsch R-8SW.
Below you can see the front view size comparison of Klipsch R-8SW and Klipsch R-10SWi in scale.
Comparison image of Klipsch R-8SW and Klipsch R-10SWi Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-8SW is approximately 1031.6cm2 / 159.9inch2 and base area of the Klipsch R-10SWi is approximately 1469.2cm2 / 227.7inch2. The R-8SW requires 30% less surface area than the R-10SWi which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-8SW weighs 6.82kg / 15lbs and the Klipsch R-10SWi weighs 11.59kg / 25.5lbs. This makes the R-10SWi 70% heavier than the R-8SW.
Here is a comparison of how R-8SW and R-10SWi's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-8SW?
Here are the items that are included inside the box of R-8SW:
Powered sub6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Sheet
What's in the Box of Klipsch R-10SWi?
Here are the items that come with the R-10SWi:
Powered subWireless transmitter (attached 12
 Height |
335mm
vs
370mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1031cm2 (299x345mm)
vs
1469cm2 (318x462mm)
|
Takes less floor space |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
32 Hz
vs
38 Hz
|
Generates deeper bass |
 Price per pair* |
274USD
vs
349USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Klipsch Reference R-8SW |
Klipsch Reference R-10SWi |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
50 watts |
150 watts |
| Frequency Response |
38-120 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
50-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Copper IMG |
Copper IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
bottom |
rear |
Physical Specs |
|
|
| Height |
335.0mm (13.2") |
370.0mm (14.6") |
| Width |
299.0mm (11.8") |
318.0mm (12.5") |
| Depth |
345.0mm (13.6") |
462.0mm (18.2") |
| Weight |
6.82kg (15lbs) |
11.59kg (25.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |