In this review, we will be comparing R-100SW and SUB3070, two Powered Subwoofer speakers from Klipsch and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-100SW and ELAC SUB3070 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Klipsch R-100SW and ELAC SUB3070 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Klipsch R-100SWand ELAC SUB3070 have a single woofer setup however the Klipsch R-100SW's woofer is 10-inch whereas the ELAC SUB3070 features a 12-inch woofer.
Frequency Response
R-100SW has a frequency range of 32-120 Hz whereas SUB3070 has a frequency range of 18-180 Hz. With a minimum frequency of 18Hz, the SUB3070 can go significantly deeper on the low side and provide stronger bass compared to the R-100SW's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-100SW has a Bass reflex type cabinet. On the other hand the ELAC SUB3070 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-100SW's and ELAC SUB3070's external dimensions. Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm ( 14-5/8 x 12-9/16 x 18-1/16inch) whereas ELAC SUB3070 has external dimensions of 435.0 x 520.0 x 477.0mm ( 17-1/8 x 20-7/16 x 18-3/4inch) .
ELAC SUB3070 is clearly the larger of the two speakers. Its body is 200mm wider, 63mm taller and 18mm deeper than Klipsch R-100SW.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2 and base area of the ELAC SUB3070 is approximately 2480.4cm2 / 384.5inch2. The R-100SW requires 41% less surface area than the SUB3070 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-100SW weighs 10.91kg / 24lbs and the ELAC SUB3070 weighs 35.00kg / 77lbs. This makes the SUB3070 221% heavier than the R-100SW.
Here is a comparison of how R-100SW and SUB3070's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-100SW?
Here are the items that are included inside the box of R-100SW:
Powered subGrille (installed)6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of ELAC SUB3070?
Here are the items that come with the SUB3070:
Powered subwooferAC power cord2 Steel bottom plates4 Spikes4 Locking-knobs4 Protective discsOperating Instructions
 Height |
372mm
vs
435mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1468cm2 (320x459mm)
vs
2480cm2 (520x477mm)
|
Takes less floor space |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
18 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
180k Hz
vs
120k Hz
|
Generates higher frequency |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Klipsch R-100SW |
ELAC SUB3070 |
| Brand |
Klipsch |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
1200 watts |
| Frequency Response |
32-120 Hz |
18-180 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
1200-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Copper-spun IMG |
Aluminum |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
side |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
435.0mm (17.1") |
| Width |
320.0mm (12.6") |
520.0mm (20.5") |
| Depth |
459.0mm (18.1") |
477.0mm (18.8") |
| Weight |
10.91kg (24lbs) |
35.00kg (77lbs) |
| Enclosure |
Bass reflex |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
1 Year |
| Labor Warranty |
2 Years |
1 Year |