These are not the same size of amplifier: Peachtree nova300 has roughly 6x the power of Audiolab 6000A. That is about 7.8dB, so it is a question of room size and how hard your speakers are to drive, not of one being the better amplifier.
| Area | Better | Why |
|---|
| Power | A | Peachtree nova300 has more power - 300W against 50W into 8 ohms. That is about 7.8dB - a different class of amplifier rather than a bigger version of the same one, and far more than most rooms will ever ask for. |
| Room size | depends | We rate Peachtree nova300 the better fit for a large room and a very large room, and Audiolab 6000A for desk or near-field listening, a small room and a mid-size room. Match the amplifier to the room you actually have, not the one you want. |
| Grip on hard loads | evenly matched | Both behave much the same into 4 ohms - output increases strongly (450W and 75W). |
| Noise floor | A | Peachtree nova300 is the quieter design on paper - 105dB against 76dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | A | Both decode on board. Peachtree nova300 goes higher - 384kHz against 192kHz. Very few recordings exist above 192kHz, so treat this as headroom, not as sound quality. |
| Analogue inputs | B | Audiolab 6000A takes more analogue sources - 4 against 2. |
| Room to grow | evenly matched | The same expansion options on both. |
| Amplifier class | depends | Peachtree nova300 is Class D and Audiolab 6000A is Class A/B. Class D runs cool and draws almost nothing at idle; Class A/B runs warm and is the long-established mainstream choice. Modern examples of both measure well - judge by the rest of the page. |
| Shelf space | depends | Peachtree nova300 takes up about 20% less shelf area (1289cm² against 1605cm²). |
| Price | B | Audiolab 6000A costs less - $899 against $1,499 at list. |
| Watts per dollar | A | Peachtree nova300 is the cheaper watt - about $5 per watt against $18. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output. |
A Peachtree nova300 B Audiolab 6000A
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Peachtree nova300 measures better, Audiolab 6000A costs about 40% less. With most speakers in most rooms that gap is smaller in practice than it looks here. Start with the room. In a large or open-plan room, or with speakers that are hard to drive - low sensitivity, or an impedance that dips - Peachtree nova300 has the headroom, and headroom is what stops an amplifier hardening up on peaks. At desk distance or in a small room, 50 watts is already more than most people ever use, and the extra 250 watts would be headroom you pay for and never hear - we rate Peachtree nova300 poorly for near-field use for exactly that reason. Think about the whole system: the roughly $600 saved by taking the cheaper one would buy better speakers or a subwoofer, which does more for the sound than the difference between two competent amplifiers.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.