SpeakerDecision
  • SPEAKERS
    • By Type
      Passive Bookshelf Speakers Passive Floor-standing Speakers Passive Center Channel Speakers Passive In-wall Speakers All Passive Speakers Powered Subwoofers Powered Stereo Speakers
      By Feature
      HDMI Input Room Correction Subwoofer Output Front Firing Port Handheld Remote Roon Ready
      By Brand
      Acoustic Energy Aperion ATC Audio-Technica Audioengine Bluesound Bowers Wilkins Buchardt Cambridge Audio Canton DALI Definitive Technology Dynaudio ELAC Emotiva Fluance Focal Fyne Audio Genelec GoldenEar Harbeth Jamo JBL Kanto KEF KLH Klipsch Leak Mackie Magnepan MartinLogan McIntosh Mission MoFi Monitor Audio Nuvo Onkyo OSD Paradigm Perlisten Polk Audio PS Audio PSB Q Acoustics REL Revel Russound Sennheiser Sonos Sonus faber Sony Spendor SVS Tannoy Technics Triangle Velodyne Victrola Wharfedale Wilson Audio Yamaha
  • AMPLIFIERS
    • By Type
      All Amplifiers Integrated Amplifiers Stereo Receivers Streaming Amplifiers Power Amplifiers Compact Amplifiers
      By Power
      Up to 60 watts 61 to 90 watts 91 to 120 watts 121 to 180 watts Over 180 watts
      By Feature
      HDMI Input Room Correction Subwoofer Output Handheld Remote Roon Ready
      Home Theater
      All Home Theater Receivers Anthem ARCAM Denon Integra JBL Marantz McIntosh NAD Onkyo Sony Yamaha
      Headphone Amps
      All Headphone Amplifiers Cambridge Audio iFi Audio McIntosh Naim Pro-Ject Rotel Schiit Audio Sennheiser Yamaha
      Multi-Zone
      All Multi-Zone Amplifiers JBL McIntosh OSD Rotel Russound Sonos
      By Brand
      Accuphase Advance Paris Anthem Arcam Audio Research AudioControl Audioengine Audiolab Bluesound Bose Buchardt Cambridge Audio Cayin Denon Devialet ELAC Emotiva Eversolo FiiO Fosi Audio Hegel HiFi Rose Integra JBL Layer Audio Design LEAK Luxman Marantz Mark Levinson McIntosh Michi MISSION MOON Musical Fidelity NAD Naim Onkyo OSD Parasound Pass Labs Peachtree PrimaLuna Primare PS Audio Rega Rogue Audio Roksan Rotel Schiit Audio Sonos Sony SVS T+A TEAC Technics Vincent WiiM Yamaha
  • SMART FIND
  • TOOLS
  • BLOG
  1. Home
  2. Amplifiers
  3. Naim NAP 350 vs Naim NAP 300 DR
Naim NAP 350 vs Naim NAP 300 DR
x
Amp to replace
Change

Naim NAP 350

Power Amplifier | 175 watts RMS into 8-ohms

Naim NAP 350
Check price atAmazon›
Change
    
Naim NAP 300 DR

Power Amplifier | 90 watts RMS into 8-ohms

Naim NAP 300 DR
Check price atAmazon›
Naim NAP 350 Naim NAP 350
Check price atAmazon›
Naim NAP 300 DR Naim NAP 300 DR
Check price atAmazon›
Naim NAP 350
See at AMAZON
Naim NAP 300 DR
See at AMAZON

Naim NAP 350 vs Naim NAP 300 DR Power Amplifier Comparison

In this review, we will be comparing two different types of amplifiers by Naim. Naim NAP 350 is a Mono Power Amplifier speaker whereas the NAP 300 DR is a Stereo Power Amplifier speaker.

Let's have a brief look at the main features of Naim NAP 350 and Naim NAP 300 DR first before getting into our more detailed comparison.

Key SpecsNaim NAP 350Naim NAP 300 DR
BrandNaim
United Kingdom · founded 1973
Naim
United Kingdom · founded 1973
Power175 watts into 8 ohms and 345 watts into 4 ohms, per chassis, with peaks to 1.7 kW. This is a monoblock: a stereo system needs two90 watts x 2 channels into 8 ohms, and capable of prolonged output into 2 ohms with no discernible impact on performance
Amplifier classClass A/BClass A/B
Damping factor36—
Built-in DACNoNo
Phono inputNoNo
Headphone outputNoNo
BluetoothNoNo
Weight16.50kg / 36.3lbs—
Dimensions (H x W x D)3-5/8" x 17" x 12-1/2"
92.1 x 431.8 x 317.5 mm
3-7/16" x 17" x 12-3/8"
87 x 432 x 314 mm

What size room are the Naim NAP 350 and Naim NAP 300 DR Amplifiers good for?

The size of the room in which you are planning to use these amplifiers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their max power parameters:

Listening Environment Naim NAP 350 Naim NAP 300 DR
Near-field Are you nuts? Poor
Small Room Bad Average
Mid-size Room Poor Good
Large Room Good Average
Very Large Room Good Poor

NAP 350 and NAP 300 DR are members of Naim's NAP series of speakers. Below you can find the loudspeakers from this series.

Naim NAP Series History
Model Watts RMS (8-ohms) Minimum Impedance Built-in DAC
Naim NAP 300 DR
90 watts2-ohmsNo
Naim NAP 350
175 watts2-ohmsNo
Naim NAP 250
  
100 watts2-ohmsNo

The rest of this page covers where each one wins, how they compare in size, their inputs and outputs, the full specifications and a verdict.


Reasons to choose Naim NAP 350 over Naim NAP 300 DR
MSRP Price(*) 8,499USD vs 12,700USD costs less (*prices may change depending on the seller, location and time)
Watts into 8-ohms 175 watts vs 90 watts Delivers higher power into 8-ohms speakers

Reasons to choose Naim NAP 300 DR over Naim NAP 350
Base Surface Area 1356.5cm2/ 210.3inch2 vs 1371.0cm2/ 212.5inch2 takes less space in your room
Height 87mm vs 92mm Easier to fit in smaller spaces

Size, drawn to scale

FRONTNaim NAP 350 front: 432 x 92 mm (17 x 3.6 in)Naim NAP 300 DR front: 432 x 87 mm (17 x 3.4 in)Naim NAP 350432 × 92 mmNaim NAP 300 DR432 × 87 mmTOP / FOOTPRINTNaim NAP 350 footprint: 432 x 318 mm (17 x 12.5 in)Naim NAP 300 DR footprint: 432 x 314 mm (17 x 12.4 in)Naim NAP 350432 × 318 mmNaim NAP 300 DR432 × 314 mm
Both amplifiers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.

One scale for both, aligned at the back panels the way they would sit against a wall, so the deeper one visibly stands further out.

Near-identical footprints.

Inputs and Outputs

The input and output selections that are offered is an important factor when comparing two amplifiers. Here you can find how the I/O selections of the Naim NAP 350 and Naim NAP 300 DR differs from each other.

Naim NAP 350 Inputs
  • Total Number of Analog Inputs: 1
  • XLR Input Port
Naim NAP 300 DR Inputs
  • Total Number of Analog Inputs: 1
Outputs
Outputs

Balanced connections

Naim NAP 350 has balanced XLR connections and Naim NAP 300 DR does not. A balanced cable carries the signal twice, on two conductors of opposite polarity. Interference picked up along the way lands on both equally and cancels when the two are recombined at the far end, so the longer the cable run and the noisier the surroundings, the more it is worth. Whether it also yields more power depends on how the amplifier is built inside - some are balanced end to end, others convert to single-ended internally and deliver the same either way.

Naim NAP 350 vs Naim NAP 300 DR full specifications

Every spec we hold for both, side by side
SpecificationNaim NAP 350Naim NAP 300 DR
Overview
BrandNaimNaim
TypeMono Power AmplifierStereo Power Amplifier
Channels12
Amplifier classClass A/BClass A/B
Output devicesSolid StateSolid State
Released20232015
List price$8,499$12,700
SeriesNAPNAP
Power and performance
Power into 8 ohms175 W RMS90 W RMS
Power into 4 ohms345 W RMS–
Power, as rated175 watts into 8 ohms and 345 watts into 4 ohms, per chassis, with peaks to 1.7 kW. This is a monoblock: a stereo system needs two90 watts x 2 channels into 8 ohms, and capable of prolonged output into 2 ohms with no discernible impact on performance
Minimum impedance2 ohms2 ohms
Damping factor36–
THD0.006%–
Digital and DAC
Built-in DACNoNo
Network and streaming
Wi-FiNoNo
EthernetNoNo
BluetoothNoNo
Inputs
Analogue inputs11
RCA inputsNoNo
XLR inputsYesNo
Phono inputNoNo
HDMI inputNoNo
Outputs
Headphone outputNoNo
Speaker terminalsBinding posts4mm banana sockets
Features and control
CD playerNoNo
Handheld remoteNoNo
Physical
Dimensions (H x W x D)92.1 x 431.8 x 317.5 mm87 x 432 x 314 mm
Dimensions, inches3-5/8 x 17 x 12-1/2 inch3-7/16 x 17 x 12-3/8 inch
Weight16.50 kg (36.38 lbs)–
FinishesBlackBlack

A dash means the manufacturer does not publish that figure, or it does not apply. 31 specifications compared.

Verdict

Siblings in Naim's NAP range, so they share a design and a house sound. It comes down to power, features and price.

AreaBetterWhy
PowerANaim NAP 350 has more power - 175W against 90W into 8 ohms. That is about 2.9dB, so it plays usefully louder before it runs out and has more in hand on peaks.
Room sizedependsWe rate Naim NAP 350 the better fit for a large room and a very large room, and Naim NAP 300 DR for desk or near-field listening, a small room and a mid-size room. Match the amplifier to the room you actually have, not the one you want.
Analogue inputsevenly matchedThe same number of line-level inputs (1).
PriceANaim NAP 350 costs less - $8,499 against $12,700 at list.
Watts per dollarANaim NAP 350 is the cheaper watt - about $49 per watt against $141. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output.

A Naim NAP 350  B Naim NAP 300 DR
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.

Which should you choose?

Naim NAP 350 is the easier recommendation: it leads on most of the measured areas and costs less. Take Naim NAP 300 DR if one of the "depends" rows above describes your system. Start with the room. In a large or open-plan room, or with speakers that are hard to drive - low sensitivity, or an impedance that dips - Naim NAP 350 has the headroom, and headroom is what stops an amplifier hardening up on peaks. At desk distance or in a small room, 90 watts is already more than most people ever use, and the extra 85 watts would be headroom you pay for and never hear - we rate Naim NAP 350 poorly for near-field use for exactly that reason. Think about the whole system: the roughly $4,201 saved by taking the cheaper one would buy better speakers or a subwoofer, which does more for the sound than the difference between two competent amplifiers.

What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.

LATEST BLOG POSTS
JBL Summit Makalu: 44,995 Dollars and 12 Times the Amplifier of the Everest
NAD M33 V2 vs M33: Same 200 Watts, and 48 Percent More Than in 2020
PSB iQ2 vs iQ1: What 400 Dollars Buys Is a Cable You Do Not Need
Bowers & Wilkins 800 D5 vs D4: Same Published Specs, 30 to 56 Percent More Money
Arcam's Cheapest New Receiver Costs 47 Percent More. It Is Also the Only One That Changed.
Triangle Borea BR04 vs BR03: 50 Dollars More Buys 2 Hz, Bi-Wiring and a Bigger Box
Marantz Cinema Series 2 Costs 200 Dollars More With the Same Power and Weight. Here Is What Changed.
SVS Won Best Budget Home Theater at CEDIA. Here Is the Bill, and Three Cheaper Ways to Build It

Most Popular Amplifiers
Yamaha A-S301
Yamaha A-S301
60 watts into 8-ohms
Audiolab 7000A
Audiolab 7000A
70 watts into 8-ohms
Yamaha A-S801
Yamaha A-S801
100 watts into 8-ohms
Yamaha A-S501
Yamaha A-S501
85 watts into 8-ohms
Sonos Amp
Sonos Amp
125 watts into 8-ohms
Denon PMA-900HNE
Denon PMA-900HNE
50 watts into 8-ohms
Denon PMA-600NE
Denon PMA-600NE
45 watts into 8-ohms
WiiM Amp Pro
WiiM Amp Pro
60 watts into 8-ohms
Denon PMA-1700NE
Denon PMA-1700NE
70 watts into 8-ohms
Marantz PM6007
Marantz PM6007
45 watts into 8-ohms
This site contains affiliate links. We may be compensated if you make a purchase after clicking through one of them. As an Amazon Associate we earn from qualifying purchases.
Copyright © 2026 by SpeakerDecision
About Privacy Contact US Camera Decision

Report a Correction