A valve amplifier against a solid-state one. They are not really rivals: they differ in character, in what they will drive and in what owning them involves, so start there rather than with the watts.
| Area | Better | Why |
|---|
| Power | B | Audiolab 7000A has more power - 70W against 28W into 8 ohms. That is about 4dB, so it plays usefully louder before it runs out and has more in hand on peaks. |
| Room size | depends | We rate FiiO EA13 the better fit for desk or near-field listening and a small room, and Audiolab 7000A for a mid-size room, a large room and a very large room. Match the amplifier to the room you actually have, not the one you want. |
| Grip on hard loads | B | Audiolab 7000A holds up better into a 4-ohm load: its output increases strongly to 110W, where the other barely increases. That matters with demanding speakers far more than the 8-ohm figure does. |
| Noise floor | B | Audiolab 7000A is the quieter design on paper - 110dB against 97dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | B | Audiolab 7000A has a DAC on board; the other needs an external one, which is another box, another power lead and another purchase. |
| Analogue inputs | A | FiiO EA13 takes more analogue sources - 4 against 3. |
| Phono stage | depends | Audiolab 7000A has a built-in phono stage (MM) and FiiO EA13 does not. Decisive if you own a turntable, completely irrelevant if you do not - and an outboard phono stage is easy to add later either way. |
| Amplifier type | depends | FiiO EA13 is Tube and Audiolab 7000A is Solid State. Valve designs are usually warmer and softer at the limits and need their tubes replaced eventually; solid state is the lower-maintenance choice. This is a taste and ownership decision, not a quality one. |
| Price | A | FiiO EA13 costs less - $770 against $999 at list. |
| Watts per dollar | B | Audiolab 7000A is the cheaper watt - about $14 per watt against $28. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output. |
A FiiO EA13 B Audiolab 7000A
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Audiolab 7000A leads across most of the measured areas for a fairly modest premium, so it is the easier pick if the budget stretches. FiiO EA13 is the one to take if it does not. If your speakers are a difficult load - 4 ohms nominal, big woofers, or a sensitivity in the low 80s - Audiolab 7000A is the safer partner, because how an amplifier behaves when the impedance drops matters more than its 8-ohm rating. Start with the room. In a large or open-plan room, or with speakers that are hard to drive - low sensitivity, or an impedance that dips - Audiolab 7000A has the headroom, and headroom is what stops an amplifier hardening up on peaks. At desk distance or in a small room, 28 watts is already more than most people ever use, and the extra 42 watts would be headroom you pay for and never hear - we rate Audiolab 7000A poorly for near-field use for exactly that reason.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.