No single best amplifier here. What decides it is what you have to drive, what you need to plug in, and how much of the system you want in one box.
| Area | Better | Why |
|---|
| Power | A | Audiolab 7000A has more power - 70W against 45W into 8 ohms. That is about 1.9dB, which is a small step in loudness but real headroom on peaks. |
| Room size | depends | We rate Audiolab 7000A the better fit for a mid-size room, a large room and a very large room, and LEAK Stereo 130 for desk or near-field listening and a small room. Match the amplifier to the room you actually have, not the one you want. |
| Grip on hard loads | evenly matched | Both behave much the same into 4 ohms - output increases strongly (110W and 65W). |
| Noise floor | evenly matched | Much the same signal-to-noise ratio (110dB vs 108dB). |
| Built-in DAC | B | Both decode on board. LEAK Stereo 130 goes higher - 384kHz against 192kHz. Very few recordings exist above 192kHz, so treat this as headroom, not as sound quality. |
| Analogue inputs | A | Audiolab 7000A takes more analogue sources - 3 against 2. |
| Room to grow | A | Only Audiolab 7000A offers a pre-out/main-in loop - which decides whether you can add a subwoofer or a power amplifier later without replacing the box. |
| Shelf space | depends | LEAK Stereo 130 takes up about 26% less shelf area (1115cm² against 1510cm²). |
| Price | evenly matched | Priced within a few per cent of each other. |
| Watts per dollar | A | Audiolab 7000A is the cheaper watt - about $14 per watt against $22. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output. |
A Audiolab 7000A B LEAK Stereo 130
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Audiolab 7000A has the edge on paper, though not by much. The rows marked "depends" are more likely to decide this than the score is.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.