No single best amplifier here. What decides it is what you have to drive, what you need to plug in, and how much of the system you want in one box.
| Area | Better | Why |
|---|
| Power | evenly matched | Effectively the same output - 70W against 80W into 8 ohms is under 1dB, which is not an audible difference in loudness. |
| Grip on hard loads | evenly matched | Both behave much the same into 4 ohms - output increases strongly (110W and 120W). |
| Noise floor | A | Audiolab 7000A is the quieter design on paper - 110dB against 106dB. Audible mainly with sensitive speakers in a quiet room. |
| Built-in DAC | A | Both decode on board, but only Audiolab 7000A handles DSD and MQA. |
| Analogue inputs | evenly matched | The same number of line-level inputs (3). |
| Room to grow | A | Only Audiolab 7000A offers a pre-out/main-in loop - which decides whether you can add a subwoofer or a power amplifier later without replacing the box. |
| Price | evenly matched | Priced within a few per cent of each other. |
A Audiolab 7000A B Arcam A15
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Audiolab 7000A has the edge on paper, though not by much. The rows marked "depends" are more likely to decide this than the score is.
What a spec sheet cannot show: how either sounds with your speakers, how the interface feels day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.