Definitive Technology Dymension DM10 is a 2-way Passive Radiator Center Channel speaker by Definitive Technology. It was released in February 2023. Center channel speaker is an important component of a home theater system set-up as it delivers the listener significant part of the on-screen dialogue from your television. It features a 1" Hard-Dome Tweeter and 2 x 5.25" Polypropelene Woofer. Dymension DM10 also employs 1 x 9-inch passive radiators. The speaker has a frequency range of 81-23 kHz and a sensitivity of 90 dB. Definitive Dymension DM10 has an MSRP of 699$.
Room Size Suitability
The size of the room where you plan to use the Definitive Dymension DM10 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Definitive Dymension DM10 Lifestyle
Definitive Technology's Dymension Series of Loudspeakers
Dymension DM10 is a member of Definitive Technology's Dymension series of Passive speakers. The Dymension range is Definitive Technology's flagship tower and bookshelf line with balanced-array drivers. Below you can see the main specs of these speakers.
See all 8 Definitive Technology Dymension models compared »
Definitive Technology Dymension Series Speakers
Definitive Technology Dymension Series Speakers
Frequency Response of the Definitive Dymension DM10 Speaker
Definitive Dymension DM10 has a Frequency response range of 81-23 kHz and Power Range of 50-200 watts.
Here we have a comparison of how Dymension DM10's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Center Channel Speakers
Definitive Dymension DM10
Impedance and Sensitivity
Definitive Dymension DM10's nominal impedance level is
4 ohms and has a sensitivity of
90 dB.
Sensitivity
Center Channel Speakers
Definitive Dymension DM10
Nominal Impedance of the 4 Ohms means that the Definitive Technology Dymension DM10 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Definitive Technology Dymension DM10 with an AVR but use an Integrated Amplifier instead.
Sensitivity
90dB of the Definitive Technology Dymension DM10 is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Definitive Dymension DM10 plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Definitive Dymension DM10 need?
At normal listening levels in a medium room, about
15–200 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $750, or every amplifier we cover.
Input Type
Dymension DM10 features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Definitive Dymension DM10 Back View
Definitive Dymension DM10's Binding post terminals
Definitive Dymension DM10 External Dimensions and Weight
Definitive Dymension DM10 has external dimensions of (Height x Width x Depth) 7.3 x 19.5 x 12.2 in (186 x 496 x 311 mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Definitive Dymension DM10 is approximately 1542.6cm2 / 239.1inch2.
Find speakers that fit your shelf or alcove →
WeightThe Definitive Dymension DM10 weighs 13.20kg / 29lbs per piece. Here is a comparison of how Dymension DM10's weight compares with the average, max and min weights in its class.
Weight
All Center Channel Speakers
Definitive Dymension DM10
Weight
Center Channel Speakers under $750
Definitive Dymension DM10
How does the Definitive Dymension DM10 compare to the Definitive Technology Dymension DM20?
One of the natural alternative to the Definitive Dymension DM10 is the Dymension DM20 which is located one step higher in Definitive Technology's Passive Center Channel selection.
Check the Detailed Comparison of Definitive Dymension DM10 vs Dymension DM20 for more details.
Cabinet type and Materials
Definitive Dymension DM10 has a
Passive Radiator type cabinet.
Definitive Dymension DM10 - Side View
Available colors
Definitive Dymension DM10 is available in Black.
Does the Definitive Dymension DM10 come with a Grille?
Dymension DM10 comes with fixed grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Definitive Technology Dymension DM10.
Official Product Page
Official manufacturer's product page for the Definitive Technology Dymension DM10 speaker can be found below:
Official Product Page for Definitive Dymension DM10
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.