In this review, we will be comparing Dymension DM10 and ProCenter 2000, two Passive Center Channel speakers by Definitive Technology Let's have a brief look at the main features
of Definitive Dymension DM10 and Definitive ProCenter 2000 first before getting into our more
detailed comparison.
What size room are the Definitive Dymension DM10 and Definitive ProCenter 2000 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Definitive Dymension DM10 and Definitive ProCenter 2000 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Dymension DM10 and ProCenter 2000 are 2-way speakers.
| Driver |
Definitive Dymension DM10 |
Definitive ProCenter 2000 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 5.25-inch
|
Dymension DM10 features a 1" aluminum oxide Hard-Dome Tweeter and 2 x 5.25" Polypropelene Woofer . On the other hand, the ProCenter 2000 features a 1" pure aluminum dome Tweeter and 2 x 5.25" BDSS Woofer .
Frequency Response
Dymension DM10 has a frequency range of 81-23 kHz whereas ProCenter 2000 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the ProCenter 2000 can go significantly deeper on the low side and provide stronger bass compared to the Dymension DM10's min frequency of 81Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
Definitive Dymension DM10
Definitive ProCenter 2000
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Dymension DM10 is a 4 ohms speaker compared to the ProCenter 2000 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Dymension DM10 can provide this impedance level.
These two speakers also have different sensitivity levels. Dymension DM10 sensitivity is rated at 90 dB and the ProCenter 2000's is rated at 91 dB. This 1 dB difference makes the Definitive ProCenter 2000 a more sensitive speaker compared to Definitive Dymension DM10, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Dymension DM10 can handle a max power of 250 watts RMS from the amp the whereas Dymension DM10 has a max power handling value of 200 watts RMS , 50 watts less than the ProCenter 2000.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Dymension DM10 features 5-Way post type posts and ProCenter 2000 has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Definitive Dymension DM10's Binding post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Definitive Dymension DM10's and Definitive ProCenter 2000's external dimensions. Definitive Dymension DM10 has external dimensions of 186 x 496 x 311 mm ( 7.3 x 19.5 x 12.2 in) whereas Definitive ProCenter 2000 has external dimensions of 169.0 x 432.0 x 164.0mm ( 6-5/8 x 17 x 6-7/16inch) .
Definitive Dymension DM10 is clearly the larger of the two speakers. Its body is 64mm wider, 17mm taller and 147mm deeper than Definitive ProCenter 2000.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Definitive Dymension DM10 is approximately 1542.6cm2 / 239.1inch2 and base area of the Definitive ProCenter 2000 is approximately 708.5cm2 / 109.8inch2. The Dymension DM10 requires 118% more surface area than the ProCenter 2000 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Definitive Dymension DM10 weighs 13.20kg / 29lbs and the Definitive ProCenter 2000 weighs 4.55kg / 10lbs. This makes the Dymension DM10 190% heavier than the ProCenter 2000.
Here is a comparison of how Dymension DM10 and ProCenter 2000's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
Definitive Dymension DM10
Definitive ProCenter 2000
What's in the Box of Definitive ProCenter 2000?
Here are the items that come with the ProCenter 2000:
Black center-channel speakerRemovable cloth grille (installed)2 Plastic insertsOwners ManualOnline Product Registration card
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Sensitivity |
91 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
42 Hz
vs
81 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
169mm
vs
186mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
708cm2 (432x164mm)
vs
1542cm2 (496x311mm)
|
Takes less floor space |
 Price per pair* |
379USD
vs
699USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Definitive Technology Dymension DM10 |
Definitive Technology ProCenter 2000 |
| Brand |
Definitive Technology |
Definitive Technology |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
50-200 watts |
10-250 watts |
| Sensitivity |
90 dB |
91 dB |
| Impedance |
4 ohms |
8 ohms |
| Frequency Response |
81-23 kHz |
42-30k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.25" |
5.25" |
| Woofer Composition |
Polypropelene |
BDSS |
| Woofer Surround Material |
Rubber |
n/a |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
Physical Specs |
|
|
| Height |
186.0mm (7.3") |
169.0mm (6.7") |
| Width |
496.0mm (19.5") |
432.0mm (17") |
| Depth |
311.0mm (12.2") |
164.0mm (6.5") |
| Weight |
13.20kg (29lbs) |
4.55kg (10lbs) |
| Enclosure |
Passive Radiator |
Passive Radiator |
| Available Colors |
Black |
Gloss Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
n/a |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |