Bowers & Wilkins HTM6 S2 Anniversary Edition is a 2-way Passive Bass Reflex Center Channel speaker by Bowers Wilkins. Center channel speaker is an important component of a home theater system set-up as it delivers the listener significant part of the on-screen dialogue from your television. It features a 1" Decoupled Double Dome Tweeter and 2 x 5" Continuum Woofer. The speaker has a frequency range of 72-28k Hz and a sensitivity of 87 dB. BW HTM6 S2 has an MSRP of 899$ but can often be found around 764$ per pair.
What size of room is the BW HTM6 S2 speaker good for?
The size of the room in which you are planning to use the BW HTM6 S2 is an important decision factor. Here we have evaluated its suitability to various sizes of environments considering its size and max power parameters:
|Very Large Room||Poor|
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
What are the speakers in Bowers Wilkins's 600 S2 Anniversary Edition Series?
HTM6 S2 is a member of Bowers Wilkins's 600 S2 Anniversary Edition series of Passive speakers. The first generation of B&W 600 series was introduced in 1996 and sold more than 1 million in 25 years in six different generation. To celebrate the 25th year of the series, B&W introduced the S2 Anniversary Edition, which is the seventh generation of the series. Below you can see the main specs of these speakers.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
What is the Frequency Response of the BW HTM6 S2 speaker?
BW HTM6 S2 has a Frequency response range of 72-28k Hz at ±3dB (-6dB at 42Hz and 33kHz) and Power Range of 30-120 watts.
Here we have a comparison of how HTM6 S2's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Center Channel Speakers
Center Channel Speakers
What are the Impedance and Sensitivity of the BW HTM6 S2 ? Is it an easy-to-drive speaker?
BW HTM6 S2 's nominal impedance level is 8 ohms
but can go down to as low as 4.3 ohms
, and has a sensitivity of 87 dB
Center Channel Speakers
8 Ohms is pretty much the standard nominal impedance amongst stereo speakers and amplifiers so Bowers & Wilkins HTM6 S2 Anniversary Edition is not considered a difficult to drive speaker from nominal Impedance perspective.
With a sensitivity level of only 87 dB, Bowers & Wilkins HTM6 S2 Anniversary Edition is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D speakers.
Minimum Impedance of BW HTM6 S2
Even though the nominal impedance of the HTM6 S2 is 8 ohms, the minimum impedance level of this speaker according to Bowers Wilkins is 4.3 ohms Bowers & Wilkins HTM6 S2 Anniversary Edition so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Check the amplifiers that are in a similar price range to the BW HTM6 S2 :
HTM6 S2 has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can provide improvements in the overall transparency of your loudspeakers by running separate speaker wires to the low & high frequency drivers from a single amplifier. Bi-amping allows the use of separate amplifiers for the high & low frequency drivers of your loudspeaker which may result in greater dynamic range & lower distortion.
BW HTM6 S2 External Dimensions and Weight
BW HTM6 S2 has external dimensions of (Height x Width x Depth) 6-3/8 x 18-15/16 x 11-1/16inch (162.0 x 482.0 x 281.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of BW HTM6 S2 is approximately 1354.4cm2 / 209.9inch2.
The BW HTM6 S2 weighs 7.82kg / 17.2lbs per piece. Here is a comparison of how HTM6 S2's weight compares with the average, max and min weights in its class.
All Center Channel Speakers
Center Channel Speakers under $1000
Cabinet type and Materials
BW HTM6 S2 has a Bass Reflex
type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
BW HTM6 S2 comes with 4 Self-adhesive rubber feet
which you can use to secure your loudspeaker on the surface that you are putting on. It is always recommended to use some kind of feet under all types of speakers. Besides limiting the movement of the speakers, it also compensates for non-flat surfaces and limits the contact surface area of the speaker. Rubber based feet also help isolating the vibrations within certain frequency ranges.
BW HTM6 S2 is a rear-firing port speaker so you have to make sure you leave enough space between the back of the speaker and wall or bookshelf so that it has room to breathe. HTM6 S2 comes with 2 Two-piece foam port plugs
so if you don't have any choice but place the speakers too close to the walls or other surfaces, you can use these plugs in order to avoid boomy or too much bass.
BW HTM6 S2 is available in Black, White and Oak.
Does the BW HTM6 S2 come with a Grille?
HTM6 S2 comes with magnetic grilles in Black and Grey color choices. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible. Since the included grille of the HTM6 S2 is magnetic type, it is very easy to put it on and off.
What's in the Box of BW HTM6 S2 ?
Here are the items that are included inside the box of HTM6 S2:
Center-channel loudspeakerGrille (pre-installed)Two-piece foam plug4 Self-adhesive rubber feet2 Jumper-straps (pre-installed)ManualWarranty InformationBowers Wilkins brochure
Here is a list of accessories that we think you may need for the Bowers & Wilkins HTM6 S2 Anniversary Edition.
For more information about how to setup, use and maintain the Bowers & Wilkins HTM6 S2 Anniversary Edition, use the direct link below to download the official manual document:
Download User Manual for BW HTM6 S2
Here is a link to download the official brochure for the Bowers & Wilkins HTM6 S2 Anniversary Edition speaker:
Official Brochure for BW HTM6 S2
Official Product Page
Official manufacturer's product page for the Bowers & Wilkins HTM6 S2 Anniversary Edition speaker can be found below:
Official Product Page for BW HTM6 S2
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.