In this review, we will be comparing HTM6 S3 and HTM6 S2, two Passive Center Channel speakers by Bowers Wilkins Let's have a brief look at the main features
of BW HTM6 S3 and BW HTM6 S2 first before getting into our more
detailed comparison.
What size room are the BW HTM6 S3 and BW HTM6 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the BW HTM6 S3 and BW HTM6 S2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both HTM6 S3 and HTM6 S2 are 2-way speakers.
| Driver |
BW HTM6 S3 |
BW HTM6 S2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5-inch
|
2 x 5-inch
|
HTM6 S3 features a 1" Titanium Decoupled Double Dome Tweeter and 2 x 5" Continuum Woofer . On the other hand, the HTM6 S2 features a 1" Decoupled Double Dome Tweeter and 2 x 5" Continuum Woofer .
Frequency Response
HTM6 S3 and HTM6 S2 has exactly the same frequency range of 72-28k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
HTM6 S3 and HTM6 S2 have the same Impedance of 8 ohms and their sensitivity is also same at 87 dB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
HTM6 S3 and HTM6 S2 has the same power range of 30-120 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both HTM6 S3 and HTM6 S2 features dual binding post speaker terminals for bi-amping or bi-wiring.
BW HTM6 S3 's Binding post terminals allows Bi-amping or bi-wiring
BW HTM6 S2 's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both HTM6 S3 and HTM6 S2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare BW HTM6 S3 's and BW HTM6 S2 's external dimensions. BW HTM6 S3 has external dimensions of 160.0 x 480.0 x 283.0mm ( 6.3 x 18.9 x 11.2inch) whereas BW HTM6 S2 has external dimensions of 162.0 x 482.0 x 281.0mm ( 6-3/8 x 18-15/16 x 11-1/16inch) .
BW HTM6 S3 is 2mm narrower and 2mm shorter than BW HTM6 S2 but it is also 2mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the BW HTM6 S3 is approximately 1358.4cm2 / 210.6inch2 and base area of the BW HTM6 S2 is approximately 1354.4cm2 / 209.9inch2. The HTM6 S3 requires 0% more surface area than the HTM6 S2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The BW HTM6 S3 weighs 7.70kg / 16.9lbs and the BW HTM6 S2 weighs 7.82kg / 17.2lbs. This makes the HTM6 S2 2% heavier than the HTM6 S3.
Here is a comparison of how HTM6 S3 and HTM6 S2's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of BW HTM6 S3 ?
Here are the items that are included inside the box of HTM6 S3:
Center-channel loudspeakerGrille (pre-installed)Two-piece foam plug4 Self-adhesive rubber feet2 Jumper-straps (pre-installed)ManualWarranty InformationBowers Wilkins brochure
What's in the Box of BW HTM6 S2 ?
Here are the items that come with the HTM6 S2:
Center-channel loudspeakerGrille (pre-installed)Two-piece foam plug4 Self-adhesive rubber feet2 Jumper-straps (pre-installed)ManualWarranty InformationBowers Wilkins brochure
 Height |
160mm
vs
162mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1354cm2 (482x281mm)
vs
1358cm2 (480x283mm)
|
Takes less floor space |
| General |
Bowers & Wilkins HTM6 S3 |
Bowers & Wilkins HTM6 S2 Anniversary Edition |
| Brand |
Bowers Wilkins |
Bowers Wilkins |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
30-120 watts |
30-120 watts |
| Sensitivity |
87 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4.3 ohms |
4.3 ohms |
| Frequency Response |
72-28k Hz |
72-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5" |
5" |
| Woofer Composition |
Continuum |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Decoupled Double Dome |
Decoupled Double Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
160.0mm (6.3") |
162.0mm (6.4") |
| Width |
480.0mm (18.9") |
482.0mm (19") |
| Depth |
283.0mm (11.1") |
281.0mm (11.1") |
| Weight |
7.70kg (16.9lbs) |
7.82kg (17.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Available Colors |
Black, White, Oak |
Black, White, Oak |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |