In this review, we will be comparing TuneTot and Evoke 30, two Passive Bookshelf speakers from Wilson Audio and Dynaudio.
Let's have a brief look at the main features
of Wilson Audio TuneTot and Dynaudio Evoke 20 first before getting into our more
detailed comparison.
Wilson Audio TuneTot Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.75" Paper pulp Woofer
- 65-23k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:from 25watts
- Weight:13.15kg
- Dimensions (H x W x D): 14-13/16" x 8-5/8" x 10-3/16" ( 377.0 x 219.0 x 259.0mm )
Dynaudio Evoke 20 Key Specs
- 2-way Design
- 1.1" Tweeter
- 7" Magnesium Silicate Polymer Woofer
- 40-23k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 180watts
- Weight:9.90kg
- Dimensions (H x W x D): 15" x 8.5" x 12.1" ( 380.0 x 215.0 x 343.0mm )
What size room are the Wilson Audio TuneTot and Dynaudio Evoke 20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wilson Audio TuneTot |
Dynaudio Evoke 20 |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Wilson Audio TuneTot and Dynaudio Evoke 20 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both TuneTot and Evoke 30 are 2-way speakers.
| Driver |
Wilson Audio TuneTot |
Dynaudio Evoke 20 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.75-inch
|
1 x 7-inch
|
TuneTot features a 1" Doped silk fabric Dome Tweeter and 1 x 5.75" Paper pulp Woofer . On the other hand, the Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 7" Magnesium Silicate Polymer Woofer with a Crossover frequency at 3200Hz.
Frequency Response
TuneTot has a frequency range of 65-23k Hz whereas Evoke 30 has a frequency range of 40-23k Hz. With a minimum frequency of 40Hz, the Evoke 30 can go significantly deeper on the low side and provide stronger bass compared to the TuneTot's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
TuneTot is a 8 ohms speaker compared to the Evoke 30 which has a nominal impedance of 6 ohms.
On the other hand, they have the same sensitivity of 86 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
TuneTot can handle a max power of 180 watts RMS from the amp the whereas TuneTot has a max power handling value of watts RMS , 180 watts less than the Evoke 30.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
TuneTot features Binding post type posts and Evoke 30 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Dynaudio Evoke 20's Binding post terminals
Cabinet Type and Port Position
Both TuneTot and Evoke 30 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wilson Audio TuneTot's and Dynaudio Evoke 20's external dimensions. Wilson Audio TuneTot has external dimensions of 377.0 x 219.0 x 259.0mm ( 14-13/16 x 8-5/8 x 10-3/16inch) whereas Dynaudio Evoke 20 has external dimensions of 380.0 x 215.0 x 343.0mm ( 15 x 8.5 x 12.1inch) .
Wilson Audio TuneTot is 3mm shorter and 84mm less deeper than Dynaudio Evoke 20 but it is also 4mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wilson Audio TuneTot is approximately 567.2cm2 / 87.9inch2 and base area of the Dynaudio Evoke 20 is approximately 737.5cm2 / 114.3inch2. The TuneTot requires 23% less surface area than the Evoke 30 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wilson Audio TuneTot weighs 13.15kg / 28.9lbs and the Dynaudio Evoke 20 weighs 9.90kg / 21.8lbs. This makes the TuneTot 33% heavier than the Evoke 30.
Here is a comparison of how TuneTot and Evoke 30's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Dynaudio Evoke 20?
Here are the items that come with the Evoke 30:
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Height |
377mm
vs
380mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
567cm2
vs
737cm2
|
Takes less floor space |
 Woofer Size |
7 inches
vs
5.75 inches
|
Larger woofer |
|
Low Frequency Response |
40 Hz
vs
65 Hz
|
Generates deeper bass |
 Price per pair* |
4798USD
vs
13545USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Wilson Audio TuneTot |
Dynaudio Evoke 20 |
| Brand |
Wilson Audio |
Dynaudio |
| Speaker Type |
Bookshelf speakers |
Floor-standing speaker |
| Power Range |
from 25 watts |
up to 180 watts |
| Sensitivity |
86 dB |
86 dB |
| Impedance |
8 ohms |
6 ohms |
| Impedance |
6.61 ohms |
n/a |
| Frequency Response |
65-23k Hz |
40-23k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.75" |
7" |
| Woofer Composition |
Paper pulp |
Magnesium Silicate Polymer |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1.1" |
| Tweeter Type |
Dome |
n/a |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
3200Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
377.0mm (14.8") |
380.0mm (15") |
| Width |
219.0mm (8.6") |
215.0mm (8.5") |
| Depth |
259.0mm (10.2") |
343.0mm (13.5") |
| Weight |
13.15kg (28.9lbs) |
9.90kg (21.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
n/a |
Black |
| Mounting Bracket |
|
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years (8 Years registered) |
| Labor Warranty |
5 Years |
5 Years (8 Years registered) |