In this review, we will be comparing Diamond 12.4 and Prime Tower, two Passive Floor-standing speakers from Wharfedale and SVS.
Let's have a brief look at the main features
of Wharfedale Diamond 12.4 and SVS Prime Tower first before getting into our more
detailed comparison.
| Key Specs | Wharfedale Diamond 12.4 | SVS Prime Tower |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1" Soft-Dome | 1" dome |
|---|
| Midrange | — | 4.5" |
|---|
| Woofer | 2 x 6.5" Mica-infused polypropylene | 2 x 6.5" Polypropylene |
|---|
| Frequency response | 40-20k Hz | 30-25k Hz |
|---|
| Sensitivity | 89 dB | 87 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 30-200 watts | 20-250 watts |
|---|
| Weight | 22.40kg / 49.3lbs | 18.23kg / 40.1lbs |
|---|
| Dimensions (H x W x D) | 45-1/2" x 8" x 15-1/4"
1156.0 x 200.0 x 388.0mm | 36-5/8" x 8" x 11-11/16"
931.0 x 204.0 x 297.0mm |
|---|
What size room are the Wharfedale Diamond 12.4 and SVS Prime Tower speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale Diamond 12.4 |
SVS Prime Tower |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Diamond 12.4 is a 2-way design whereas the Prime Tower is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Wharfedale Diamond 12.4SVS Prime Tower
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Wharfedale Diamond 12.4 |
SVS Prime Tower |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 4.5-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
Diamond 12.4 features a 1" Textile Soft-Dome Tweeter and 2 x 6.5" Mica-infused polypropylene Woofer with a Crossover frequency at 2100Hz. On the other hand, the Prime Tower features a 1" aluminum dome Tweeter, a 4.5" Midrange and 2 x 6.5" Polypropylene Woofer with a Crossover frequency at 350Hz and 2100Hz.
Frequency Response
Diamond 12.4 has a frequency range of 40-20k Hz whereas Prime Tower has a frequency range of 30-25k Hz. With a minimum frequency of 30Hz, the Prime Tower can go significantly deeper on the low side and provide stronger bass compared to the Diamond 12.4's min frequency of 40Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Diamond 12.4 and Prime Tower have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Diamond 12.4 sensitivity is rated at 89 dB and the Prime Tower's is at 87 dB. This 2 dB difference makes the Wharfedale Diamond 12.4 a more sensitive speaker compared to SVS Prime Tower, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Prime Tower can handle a max power of 250 watts RMS, whereas Diamond 12.4 has a max power handling value of 200 watts RMS, 50 watts less than the Prime Tower.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Diamond 12.4 features Binding post posts which make bi-amping or bi-wiring possible. Prime Tower has a 5-Way post which doesn't feature bi-amping/bi-wiring.
SVS Prime Tower's 5-Way post terminals
Cabinet Type and Port Position
Both Diamond 12.4 and Prime Tower have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale Diamond 12.4's and SVS Prime Tower's external dimensions. Wharfedale Diamond 12.4 has external dimensions of 1156.0 x 200.0 x 388.0mm (45-1/2 x 8 x 15-1/4inch) whereas SVS Prime Tower has external dimensions of 931.0 x 204.0 x 297.0mm (36-5/8 x 8 x 11-11/16inch).
SVS Prime Tower is 225mm shorter and 91mm less deeper than Wharfedale Diamond 12.4 but it is also 4mm wider.
Below you can see the front view size comparison of Wharfedale Diamond 12.4 and SVS Prime Tower in scale.
Comparison image of Wharfedale Diamond 12.4 and SVS Prime Tower Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale Diamond 12.4 is approximately 776.0cm2 / 120.3inch2 and base area of the SVS Prime Tower is approximately 605.9cm2 / 93.9inch2. The Diamond 12.4 requires 28% more surface area than the Prime Tower which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale Diamond 12.4 weighs 22.40kg / 49.3lbs and the SVS Prime Tower weighs 18.23kg / 40.1lbs. This makes the Diamond 12.4 23% heavier than the Prime Tower.
Here is a comparison of how Diamond 12.4 and Prime Tower's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Wharfedale Diamond 12.4?
Here are the items that are included inside the box of Diamond 12.4:
- Floorstanding loudspeaker
- Grille
- 4 Spike feet (w/ locking collars)
- 2 Jumper-bars (pre-installed)
- 4 Isolation pucks
- Users Manual
What's in the Box of SVS Prime Tower?
Here are the items that come with the Prime Tower:
- Floorstanding loudspeaker
- Grille (pre-installed)
- 4 Elastomer isolation feet (pre-installed)
- 4 Spike feet
- 4 Nuts
- 4 Protective discs
- Owners Manual
- SVS brochure
- Online Product Registration Card
 Sensitivity |
89 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Price per pair* |
1298USD
vs
1400USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Low Frequency Response |
30 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
20k Hz
|
Generates higher frequency |
 Height |
931mm
vs
1156mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
605cm2
vs
776cm2
|
Takes less floor space |
| General |
Wharfedale Diamond 12.4 |
SVS Prime Tower |
| Brand |
Wharfedale |
SVS |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
30-200 watts |
20-250 watts |
| Sensitivity |
89 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
5 ohms |
n/a |
| Frequency Response |
40-20k Hz |
30-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Mica-infused polypropylene |
Polypropylene |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
4.5" |
| Crossover Frequency |
2100Hz |
350Hz and 2100Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1156.0mm (45.5") |
931.0mm (36.7") |
| Width |
200.0mm (7.9") |
204.0mm (8") |
| Depth |
388.0mm (15.3") |
297.0mm (11.7") |
| Weight |
22.40kg (49.3lbs) |
18.23kg (40.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
A generation apart: Wharfedale Diamond 12.4 is the newer design, against a 2015 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass |
B |
SVS Prime Tower digs deeper - 30Hz against 40Hz. |
| Amplifier needs |
A |
Wharfedale Diamond 12.4 is more sensitive (89dB vs 87dB), so it goes louder on the same amplifier. |
| Headroom |
B |
SVS Prime Tower takes more power (250W vs 200W) - more in hand in a big room. |
| Size |
depends |
SVS Prime Tower is easier to place; Wharfedale Diamond 12.4 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability |
A |
Wharfedale Diamond 12.4: bi-amping. Wharfedale Diamond 12.4 sits in a wider range (12 models), so a matched surround system is easier later. |
| Price |
evenly matched |
Much the same money ($1,298 vs $1,400 a pair). |
A Wharfedale Diamond 12.4
B SVS Prime Tower
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 40Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Wharfedale Diamond 12.4 the better fit for a mid-size room, and SVS Prime Tower for a very large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.