In this review, we will be comparing Borea BR08 and RP-6000F, two Passive Floor-standing speakers from Triangle and Klipsch. Let's have a brief look at the main features
of Triangle Borea BR08 and Klipsch RP-6000F first before getting into our more
detailed comparison.
What size room are the Triangle Borea BR08 and Klipsch RP-6000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Triangle Borea BR08 and Klipsch RP-6000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Borea BR08 is a 3-way design whereas the RP-6000F is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Triangle Borea BR08 |
Klipsch RP-6000F |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
- |
|
Woofer
|
2 x 6-inch
|
2 x 6.5-inch
|
Borea BR08 features a 1" silk Break_in Tweeter , a 6" Midrange and 2 x 6" fiberglass Woofer with a Crossover frequency at 215Hz and 3500Hz. On the other hand, the RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer .
Frequency Response
Borea BR08 has a frequency range of 40 - 22k Hz whereas RP-6000F has a frequency range of 34-25k Hz. With a minimum frequency of 34Hz, the RP-6000F can go significantly deeper on the low side and provide stronger bass compared to the Borea BR08's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Borea BR08 and RP-6000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Borea BR08 sensitivity is rated at 92 dB and the RP-6000F's is at 97 dB. This 5 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Triangle Borea BR08, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Borea BR08 can handle a max power of 150 watts RMS from the amp the whereas RP-6000F has a max power handling value of 125 watts RMS, 25 watts less than the Borea BR08.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-6000F features Post posts which make bi-amping or bi-wiring possible. Borea BR08 has a Binding post which doesn't feature bi-amping/bi-wiring.
Triangle Borea BR08's Binding post terminals
Klipsch RP-6000F's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Borea BR08 has a front firing port whereas RP-6000F has a rear firing ports. Triangle Borea BR08's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Klipsch RP-6000F with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Triangle Borea BR08's and Klipsch RP-6000F's external dimensions. Triangle Borea BR08 has external dimensions of 1020.0 x 206.0 x 314.0mm ( 40.1 x 8.1 x 12.3inch) whereas Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) .
Triangle Borea BR08 is 31mm narrower and 118mm less deeper than Klipsch RP-6000F but it is also 10mm taller.
Below you can see the front view size comparison of Triangle Borea BR08 and Klipsch RP-6000F in scale.
Comparison image of Triangle Borea BR08 and Klipsch RP-6000F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Triangle Borea BR08 is approximately 646.8cm2 / 100.3inch2 and base area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2. The Borea BR08 requires 37% less surface area than the RP-6000F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Triangle Borea BR08 weighs 18.85kg / 41.5lbs and the Klipsch RP-6000F weighs 22.27kg / 49lbs. This makes the RP-6000F 18% heavier than the Borea BR08.
Here is a comparison of how Borea BR08 and RP-6000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Triangle Borea BR08?
Here are the items that are included inside the box of Borea BR08:
2 x Borea speakers 2 x protections grids 2 x pedestals 8 x screws 8 x adhesive rubber plots 8 x decoupling spikes 1 x user manual
What's in the Box of Klipsch RP-6000F?
Here are the items that come with the RP-6000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
150 watts
vs
125 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Base Surface Area |
646cm2 (206x314mm)
vs
1023cm2 (237x432mm)
|
Takes less floor space |
 Sensitivity |
97 dB
vs
92 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
6 inches
|
Larger woofer |
| Low Frequency Response |
34 Hz
vs
40 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
22k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1010mm
vs
1020mm
|
Easier to fit in smaller spaces |
 Price per pair* |
1378USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Triangle Borea BR08 |
Klipsch Reference Premiere RP-6000F |
| Brand |
Triangle |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 150 watts |
up to 125 watts |
| Sensitivity |
92 dB |
97 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3 ohms |
n/a |
| Frequency Response |
40 - 22k Hz |
34-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
6.5" |
| Woofer Composition |
fiberglass |
Cerametallic |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Break_in |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
No |
| Crossover Frequency |
215Hz and 3500Hz |
n/a |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
1020.0mm (40.2") |
1010.0mm (39.8") |
| Width |
206.0mm (8.1") |
237.0mm (9.3") |
| Depth |
314.0mm (12.4") |
432.0mm (17") |
| Weight |
18.85kg (41.5lbs) |
22.27kg (49lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain vinyl |
| Available Colors |
Light Oak, Walnut, Black, White |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |