In this review, we will be comparing two different types of speakers. Tannoy Revolution XT 6F is a Floor-standing speaker whereas the LS50 is a Bookshelf speaker.
Let's have a brief look at the main features
of Tannoy Revolution XT 6F and KEF LS50 first before getting into our more
detailed comparison.
| Key Specs | Tannoy Revolution XT 6F | KEF LS50 |
|---|
| Brand | Tannoy United Kingdom · founded 1926 | KEF United Kingdom · founded 1961 |
|---|
| Design | 3-way | 2-way |
|---|
| Uni-Q driver | — | 11th Generation Uni-Q |
|---|
| Tweeter | — | 1" Vented dome |
|---|
| Woofer | — | 5.25" Magnesium/aluminum alloy |
|---|
| Frequency response | 38-32k Hz | 79-28k Hz |
|---|
| Sensitivity | 90 dB | 85 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | — | 25-100 watts |
|---|
| Weight | 16.30kg / 35.9lbs | 7.20kg / 15.8lbs |
|---|
| Dimensions (H x W x D) | 39.6" x 10.6" x 12.5" 1005.8 x 269.2 x 317.5mm | 11.8" x 7.8" x 10.9" 302.0 x 200.0 x 278.0mm |
|---|
What size room are the Tannoy Revolution XT 6F and KEF LS50 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Tannoy Revolution XT 6F |
KEF LS50 |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Revolution XT 6F is a 3-way design whereas the LS50 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Tannoy Revolution XT 6F |
KEF LS50 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
x -inch
|
1 x 5.25-inch
|
Revolution XT 6F features a " Tweeter and x " Woofer with a Crossover frequency at 250 Hz & 1.8 kHz. On the other hand, the LS50 features a 1" Aluminum Vented dome Tweeter and 1 x 5.25" Magnesium/aluminum alloy Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Revolution XT 6F has a frequency range of 38-32k Hz whereas LS50 has a frequency range of 79-28k Hz. With a minimum frequency of 38Hz, the Revolution XT 6F can go significantly deeper on the low side and provide stronger bass compared to the LS50's min frequency of 79Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Revolution XT 6F and LS50 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Revolution XT 6F sensitivity is rated at 90 dB and the LS50's is at 85 dB. This 5 dB difference makes the Tannoy Revolution XT 6F a more sensitive speaker compared to KEF LS50, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Revolution XT 6F features Post type posts and LS50 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF LS50's Post terminals
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Tannoy Revolution XT 6F's and KEF LS50's external dimensions. Tannoy Revolution XT 6F has external dimensions of 1005.8 x 269.2 x 317.5mm (39.6 x 10.6 x 12.5inch) whereas KEF LS50 has external dimensions of 302.0 x 200.0 x 278.0mm (11.8 x 7.8 x 10.9inch).
Tannoy Revolution XT 6F is clearly the larger of the two speakers. Its body is 69.2mm wider, 703.8mm taller and 39.5mm deeper than KEF LS50.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Tannoy Revolution XT 6F needs about 54% more floor or shelf area. Tannoy Revolution XT 6F is 40mm deeper, so it stands that much further out from the wall. Tannoy Revolution XT 6F is 704mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Tannoy Revolution XT 6F is approximately 854.8cm2 / 132.5inch2 and base area of the KEF LS50 is approximately 556.0cm2 / 86.2inch2. The Revolution XT 6F requires 54% more surface area than the LS50 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of KEF LS50?
Here are the items that come with the LS50:
- 2 Bookshelf loudspeakers
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- Owner's Manual
- Warranty Registration Card