In this review, we will be comparing Electa Amator III and Concertino, two Passive Bookshelf speakers by Sonus faber
Let's have a brief look at the main features
of Sonus faber Electa Amator III and Sonus faber Concertino first before getting into our more
detailed comparison.
Sonus faber Electa Amator III Key Specs
- 2-way Design
- 1.1" Soft-Dome Tweeter
- 7" Paper Woofer
- 40-35k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:35-125watts
- Weight:12.50kg
- Dimensions (H x W x D): 14-3/4" x 9-1/4" x 14-3/16" ( 375.0 x 235.0 x 360.0mm )
Sonus faber Concertino Key Specs
- 2-way Design
- 1.1" Soft-Dome Tweeter
- 5.25" Paper Woofer
- 60-25k Hz Frequency Response
- 85 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-150watts
- Weight:6.60kg
- Dimensions (H x W x D): 12-3/8" x 8-7/16" x 11-11/16" ( 314.0 x 214.0 x 297.0mm )
Electa Amator III and Concertino are members of Sonus faber's Heritage series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Heritage Series
History
What size room are the Sonus faber Electa Amator III and Sonus faber Concertino speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Electa Amator III |
Sonus faber Concertino |
| Near-field |
Good |
Good |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus faber Electa Amator III and Sonus faber Concertino compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Electa Amator III and Concertino are 2-way speakers.
| Driver |
Sonus faber Electa Amator III |
Sonus faber Concertino |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 7-inch
|
1 x 5.25-inch
|
Electa Amator III features a 1.1" Silk Soft-Dome Tweeter and 1 x 7" Paper Woofer with a Crossover frequency at 2500 Hz. On the other hand, the Concertino features a 1.1" Silk Soft-Dome Tweeter and 1 x 5.25" Paper Woofer with a Crossover frequency at 1700Hz.
Frequency Response
Electa Amator III has a frequency range of 40-35k Hz whereas Concertino has a frequency range of 60-25k Hz. With a minimum frequency of 40Hz, the Electa Amator III can go significantly deeper on the low side and provide stronger bass compared to the Concertino's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
Sonus faber Electa Amator III
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Electa Amator III and Concertino have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Electa Amator III sensitivity is rated at 88 dB and the Concertino's is at 85 dB. This 3 dB difference makes the Sonus faber Electa Amator III a more sensitive speaker compared to Sonus faber Concertino, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Electa Amator III and the Electa Amator III can provide this impedance level.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Electa Amator III can handle a max power of 150 watts RMS from the amp the whereas Electa Amator III has a max power handling value of 125 watts RMS , 25 watts less than the Concertino.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Electa Amator III features Binding post type posts and Concertino has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Electa Amator III's and Sonus faber Concertino's external dimensions. Sonus faber Electa Amator III has external dimensions of 375.0 x 235.0 x 360.0mm ( 14-3/4 x 9-1/4 x 14-3/16inch) whereas Sonus faber Concertino has external dimensions of 314.0 x 214.0 x 297.0mm ( 12-3/8 x 8-7/16 x 11-11/16inch) .
Sonus faber Electa Amator III is clearly the larger of the two speakers. Its body is 21mm wider, 61mm taller and 63mm deeper than Sonus faber Concertino.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Electa Amator III is approximately 846.0cm2 / 131.1inch2 and base area of the Sonus faber Concertino is approximately 635.6cm2 / 98.5inch2. The Electa Amator III requires 33% more surface area than the Concertino which gives it a small disadvantage on placement in tight spaces.