In this review, we will be comparing two different type of speakers by Sonus faber. Sonus Faber Sonetto Center G2 is a Center Channel speaker whereas the Sonus faber Sonetto III G2 is a Floor-standing speaker.
Let's have a brief look at the main features
of Sonus Faber Sonetto Center G2 and Sonus faber Sonetto III G2 first before getting into our more
detailed comparison.
Sonus Faber Sonetto Center G2 Key Specs
- 3-way Design
- 1.1" Soft-Dome Tweeter
- 4" Midrange
- 2 x 6-1/2" Woofer
- 45-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Weight:kg
- Dimensions (H x W x D): 9-1/2" x 25-9/16" x 14-9/16"
Sonus faber Sonetto III G2 Key Specs
- 2-way Design
- 1.1" Soft-dome Tweeter
- 2 x 6.5" Paper Pulp Woofer
- 38-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-280watts
- Weight:25.85kg
- Dimensions (H x W x D): 42-1/16" x 11-5/16" x 14-5/16" ( 1069.0 x 288.0 x 364.0mm )
Sonetto Center G2 and Sonus faber Sonetto III G2 are members of Sonus faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Sonetto Series
History
In the following sections, we will get into more detail in order to better understand how the Sonus Faber Sonetto Center G2 and Sonus faber Sonetto III G2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Sonetto Center G2 is a 3-way design whereas the Sonus faber Sonetto III G2 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Sonus Faber Sonetto Center G2 |
Sonus faber Sonetto III G2 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
1 x 4-inch |
- |
|
Woofer
|
2 x 6-1/2-inch
|
2 x 6.5-inch
|
Sonetto Center G2 features a 1.1" Soft-Dome Tweeter , a 4" Midrange and 2 x 6-1/2" Woofer . On the other hand, the Sonus faber Sonetto III G2 features a 1.1" Soft-dome Tweeter and 2 x 6.5" Paper Pulp Woofer .
Frequency Response
Sonetto Center G2 has a frequency range of 45-40k Hz whereas Sonus faber Sonetto III G2 has a frequency range of 38-40k Hz. With a minimum frequency of 38Hz, the Sonus faber Sonetto III G2 can go significantly deeper on the low side and provide stronger bass compared to the Sonetto Center G2's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
Sonus faber Sonetto III G2
High Frequency
Center Channel Speakers
Sonus Faber Sonetto Center G2
Sonus faber Sonetto III G2
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto Center G2 and Sonus faber Sonetto III G2 have the same Impedance of 4 ohms and their sensitivity is also same at 88 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto Center G2 and the Sonetto Center G2 can provide this impedance level.
Sensitivity
Center Channel Speakers
Sonus faber Sonetto III G2
Input Type and Bi-Amping / Bi-Wiring
Sonus faber Sonetto III G2 features Binding post posts which make bi-amping or bi-wiring possible. Sonetto Center G2 has a Binding Post which doesn't feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Faber Sonetto Center G2's and Sonus faber Sonetto III G2's external dimensions. Sonus Faber Sonetto Center G2 has external dimensions of ( ) whereas Sonus faber Sonetto III G2 has external dimensions of 1069.0 x 288.0 x 364.0mm ( 42-1/16inch x 11-5/16inch x 14-5/16inch ) .
Sonus faber Sonetto III G2 is clearly the larger of the two speakers. Its body is 288mm wider, 1069mm taller and 364mm deeper than Sonus Faber Sonetto Center G2.
What's in the Box of Sonus faber Sonetto III G2?
Here are the items that come with the Sonus faber Sonetto III G2:
- 2 Floorstanding loudspeakers
- 6 Grilles
- 4 Jumper-straps (pre-installed)
- 2 Binding-post covers (pre-installed)
- 8 Rubber feet
- 8 Spikes 8 Protective discs
- 8 Locking washers
- Wrench
- Dust cloth