In this review, we will be comparing S10 and R-41M, two Passive Bookshelf speakers from Polk Audio and Klipsch. Let's have a brief look at the main features
of Polk S10 and Klipsch R-41M first before getting into our more
detailed comparison.
What size room are the Polk S10 and Klipsch R-41M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Polk S10 and Klipsch R-41M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both S10 and R-41M are 2-way speakers.
| Driver |
Polk S10 |
Klipsch R-41M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4-inch
|
1 x 4-inch
|
S10 features a 1" Terylene Soft-Dome Tweeter and 1 x 4" Mica-reinforced polypropylene Woofer with a Crossover frequency at 2500Hz. On the other hand, the R-41M features a 1" Tractrix Horn Tweeter and 1 x 4" Copper-spun IMG Woofer with a Crossover frequency at 1730Hz.
Frequency Response
S10 has a frequency range of 67-40k Hz whereas R-41M has a frequency range of 68-21k Hz. With a minimum frequency of 67Hz, the S10 can go slightly deeper then the R-41M's min frequency of 68Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
S10 and R-41M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. S10 sensitivity is rated at 87 dB and the R-41M's is at 90 dB. This 3 dB difference makes the Klipsch R-41M a more sensitive speaker compared to Polk S10, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
S10 can handle a max power of 100 watts RMS from the amp the whereas R-41M has a max power handling value of 50 watts RMS, 50 watts less than the S10.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
S10 features Single Gold Plated Binding Posts type posts and R-41M has a Single Gold Plated Binding Posts type posts. None of these speakers feature bi-amping/bi-wiring.
Polk S10's 5-way post terminals
Klipsch R-41M's Single Gold Plated Binding Posts terminals
Cabinet Type and Port Position
Both S10 and R-41M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk S10's and Klipsch R-41M's external dimensions. Polk S10 has external dimensions of 214.0 x 127.0 x 155.0mm ( 8.4 x 5.0 x 6.1inch) whereas Klipsch R-41M has external dimensions of 287.0 x 146.0 x 200.0mm ( 11.2 x 5.7 x 7.8inch) .
Klipsch R-41M is clearly the larger of the two speakers. Its body is 19mm wider, 73mm taller and 45mm deeper than Polk S10.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk S10 is approximately 196.9cm2 / 30.5inch2 and base area of the Klipsch R-41M is approximately 292.0cm2 / 45.3inch2. The S10 requires 33% less surface area than the R-41M which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk S10 weighs 2.73kg / 6lbs and the Klipsch R-41M weighs 3.20kg / 7lbs. This makes the R-41M 17% heavier than the S10.
Here is a comparison of how S10 and R-41M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Polk S10?
Here are the items that are included inside the box of S10:
2 Bookshelf loudspeakers2 Grille (attached)8 Self-adhesive rubber feetWall-mount templateOwners ManualOnline Product Registration
What's in the Box of Klipsch R-41M?
Here are the items that come with the R-41M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet Quick Setup Guide Important Safety Instructions Warranty Information
 Max Input Power |
100 watts
vs
50 watts
|
Handle more power from your amplifier |
 Low Frequency Response |
67 Hz
vs
68 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
21k Hz
|
Generates higher frequency |
 Height |
214mm
vs
287mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
196cm2 (127x155mm)
vs
292cm2 (146x200mm)
|
Takes less floor space |
 Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
| General |
Polk Audio Signature S10 |
Klipsch Reference R-41M |
| Brand |
Polk Audio |
Klipsch |
| Speaker Type |
Satellite speakers |
Bookshelf speakers |
| Power Range |
20-100 watts |
50 watts |
| Sensitivity |
87 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
67-40k Hz |
68-21k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
4" |
4" |
| Woofer Composition |
Mica-reinforced polypropylene |
Copper-spun IMG |
| Woofer Surround Material |
Butyl rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Soft-Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2500Hz |
1730Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
214.0mm (8.4") |
287.0mm (11.3") |
| Width |
127.0mm (5") |
146.0mm (5.7") |
| Depth |
155.0mm (6.1") |
200.0mm (7.9") |
| Weight |
2.73kg (6lbs) |
3.20kg (7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Meddite MDF |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Mounting Bracket |
Keyhole |
Keyhole |
| Recommended Stand Height |
28-31" |
26-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |