In this review, we will be comparing two different types of speakers by Polk Audio. Polk Audio Legend L600 is a Floor-standing speaker whereas the L200 is a Bookshelf speaker.
Let's have a brief look at the main features
of Polk L600 and Polk L200 first before getting into our more
detailed comparison.
| Key Specs | Polk L600 | Polk L200 |
|---|
| Brand | Polk Audio
United States · founded 1972 | Polk Audio
United States · founded 1972 |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | 1" Pinnacle Ring Radiator | 1" Ring Radiator |
|---|
| Midrange | 5.25" | — |
|---|
| Woofer | 2 x 7" Polypropylene | 6.5" Polypropylene |
|---|
| Frequency response | 34-38k Hz | 46-38k Hz |
|---|
| Sensitivity | 86 dB | 85.5 dB |
|---|
| Impedance | 4 ohms | 4 ohms |
|---|
| Power range | 30-300 watts | 30-200 watts |
|---|
| Weight | 35.30kg / 77.7lbs | 10.00kg / 22lbs |
|---|
| Dimensions (H x W x D) | 46-1/2" x 13" x 16-3/4"
1182.0 x 331.0 x 426.0mm | 15-11/16" x 8-3/8" x 13-5/16"
399.0 x 213.0 x 339.0mm |
|---|
L600 and L200 are members of Polk Audio's Legend L series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk L600 and Polk L200 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Polk L600 |
Polk L200 |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that L600 is a 3-way design whereas the L200 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Polk L600Polk L200
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Polk L600 |
Polk L200 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
- |
|
Woofer
|
2 x 7-inch
|
1 x 6.5-inch
|
L600 features a 1" Pinnacle Ring Radiator Tweeter, a 5.25" Midrange and 2 x 7" Polypropylene Woofer with a Crossover frequency at 410Hz and 2900Hz. On the other hand, the L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz.
Frequency Response
L600 has a frequency range of 34-38k Hz whereas L200 has a frequency range of 46-38k Hz. With a minimum frequency of 34Hz, the L600 can go significantly deeper on the low side and provide stronger bass compared to the L200's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
L600 and L200 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. L600 sensitivity is rated at 86 dB and the L200's is at 85.5 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the L600 and the L600 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
L600 can handle a max power of 300 watts RMS, whereas L200 has a max power handling value of 200 watts RMS, 100 watts less than the L600.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both L600 and L200 features dual binding post speaker terminals for bi-amping or bi-wiring.
Polk L600's Binding post terminals allows Bi-amping or bi-wiring
Polk L200's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
L600 has a down firing port whereas L200 has a rear firing ports.
Polk L200 Enhanced Power Port Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk L600's and Polk L200's external dimensions. Polk L600 has external dimensions of 1182.0 x 331.0 x 426.0mm (46-1/2 x 13 x 16-3/4inch) whereas Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm (15-11/16 x 8-3/8 x 13-5/16inch).
Polk L600 is clearly the larger of the two speakers. Its body is 118mm wider, 783mm taller and 87mm deeper than Polk L200.
Below you can see the front view size comparison of Polk L600 and Polk L200 in scale.
Comparison image of Polk L600 and Polk L200 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk L600 is approximately 1410.1cm2 / 218.6inch2 and base area of the Polk L200 is approximately 722.1cm2 / 111.9inch2. The L600 requires 95% more surface area than the L200 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Polk L600?
Here are the items that are included inside the box of L600:
- Floorstanding loudspeaker
- Large grille
- Small grille
- 4 Rubber feet (pre-installed)
- 4 Spike feet (pre-installed)
- 2 Jumper-wires (pre-installed)
- Cleaning cloth
- Owners Manual
- Online Registration
What's in the Box of Polk L200?
Here are the items that come with the L200:
- 2 Bookshelf loudspeakers
- 2 Grilles
- Cleaning cloth
- Owners Manual
- Online Registration