In this review, we will be comparing Silver 200 7G and RP-6000F, two Passive Floor-standing speakers from Monitor Audio and Klipsch. Let's have a brief look at the main features
of Monitor Audio Silver 200 7G and Klipsch RP-6000F first before getting into our more
detailed comparison.
What size room are the Monitor Audio Silver 200 7G and Klipsch RP-6000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Silver 200 7G and Klipsch RP-6000F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Silver 200 7G and RP-6000F are 2-way speakers.
Driver |
Monitor Audio Silver 200 7G |
Klipsch RP-6000F |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
1-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
2 x 5.25-inch
|
2 x 6.5-inch
|
Silver 200 7G features a 1" gold dome C-CAM with uniform dispersion (UD) waveguide Tweeter and 2 x 5.25" C-CAM RST II Woofer . On the other hand, the RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer .
Frequency Response
Silver 200 7G has a frequency range of 34-35k Hz whereas RP-6000F has a frequency range of 34-25k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Monitor Audio Silver 200 7G
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Silver 200 7G and RP-6000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Silver 200 7G sensitivity is rated at 87.5 dB and the RP-6000F's is at 97 dB. This 9 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Monitor Audio Silver 200 7G, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Silver 200 7G can handle a max power of 150 watts RMS from the amp the whereas RP-6000F has a max power handling value of 125 watts RMS, 25 watts less than the Silver 200 7G.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Silver 200 7G and RP-6000F features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Silver 200 7G's and Klipsch RP-6000F's external dimensions. Monitor Audio Silver 200 7G has external dimensions of 920.0 x 253.0 x 332.0mm ( 36-3/16 x 9-15/16 x 13-1/16inch) whereas Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) .
Monitor Audio Silver 200 7G is 90mm shorter and 100mm less deeper than Klipsch RP-6000F but it is also 16mm wider.
Below you can see the front view size comparison of Monitor Audio Silver 200 7G and Klipsch RP-6000F in scale.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Silver 200 7G is approximately 840.0cm2 / 130.2inch2 and base area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2. The Silver 200 7G requires 18% less surface area than the RP-6000F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Silver 200 7G weighs 13.77kg / 30.3lbs and the Klipsch RP-6000F weighs 22.27kg / 49lbs. This makes the RP-6000F 62% heavier than the Silver 200 7G.
Here is a comparison of how Silver 200 7G and RP-6000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 200 7G
What's in the Box of Monitor Audio Silver 200 7G?
Here are the items that are included inside the box of Silver 200 7G:
Floorstanding loudspeakerGrille4 Outrigger feet4 Rubber feet (pre-installed on outrigger feet)4 Spikes4 Bolts4 Machine screws2 Foam port plugs2 Hex-keysOwners ManualImportant Safety Instructions
What's in the Box of Klipsch RP-6000F?
Here are the items that come with the RP-6000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
Max Input Power |
150 watts
vs
125 watts
|
Handle more power from your amplifier |
High Frequency Response |
35k Hz
vs
25k Hz
|
Generates higher frequency |
Height |
920mm
vs
1010mm
|
Easier to fit in smaller spaces |
Base Surface Area |
840cm2 (253x332mm)
vs
1023cm2 (237x432mm)
|
Takes less floor space |
Sensitivity |
97 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
Price per pair* |
1378USD
vs
2100USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Monitor Audio Silver 200 7G |
Klipsch Reference Premiere RP-6000F |
Brand |
Monitor Audio |
Klipsch |
Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
Power Range |
60-150 watts |
up to 125 watts |
Sensitivity |
87.5 dB |
97 dB |
Impedance |
8 ohms |
8 ohms |
Frequency Response |
34-35k Hz |
34-25k Hz |
Drivers |
|
|
Woofer Quantity |
2 |
2 |
Woofer Size |
5.25" |
6.5" |
Woofer Composition |
C-CAM RST II |
Cerametallic |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
1" |
1" |
Tweeter Type |
gold dome C-CAM with uniform dispersion (UD) waveguide |
Tractrix Horn |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Firing Direction |
n/a |
rear |
Physical Specs |
|
|
Height |
920.0mm (36.2") |
1010.0mm (39.8") |
Width |
253.0mm (10") |
237.0mm (9.3") |
Depth |
332.0mm (13.1") |
432.0mm (17") |
Weight |
13.77kg (30.3lbs) |
22.27kg (49lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
MDF/Wood veneer |
MDF/Wood-grain vinyl |
Available Colors |
Oak |
Walnut, Black |
Grille |
Yes |
Yes |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
Yes |
Yes |
Other |
|
|
Parts Warranty |
5 Years |
5 Years |
Labor Warranty |
5 Years |
5 Years |