In this review, we will be comparing SourcePoint V10 and Elysian 4, two Passive Floor-standing speakers from MoFi and Wharfedale.
Let's have a brief look at the main features
of MoFi SourcePoint V10 and Wharfedale Elysian 4 first before getting into our more
detailed comparison.
| Key Specs | MoFi SourcePoint V10 | Wharfedale Elysian 4 |
|---|
| Brand | MoFi United States · founded 2016 | Wharfedale United Kingdom · founded 1932 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1.25" Soft-Dome | 27x90mm" AMT (Ribbon) |
|---|
| Midrange | — | 6" |
|---|
| Woofer | 2 x 10" Paper Pulp | 2 x 8.5" Coated Fiberglass |
|---|
| Frequency response | 27-30k Hz | 30-22k Hz |
|---|
| Sensitivity | 91 dB | 92 dB |
|---|
| Impedance | 6 ohms | 4 ohms |
|---|
| Power range | up to 200 watts | 15-250 watts |
|---|
| Weight | 72.73kg / 160lbs | 49.60kg / 109.1lbs |
|---|
| Dimensions (H x W x D) | 48-13/16" x 15-9/16" x 19-15/16" 1240.0 x 396.0 x 507.0mm | 46-3/4" x 15-13/16" x 18-3/16" 1188.0 x 402.0 x 462.0mm |
|---|
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that SourcePoint V10 is a 2-way design whereas the Elysian 4 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
MoFi SourcePoint V10Wharfedale Elysian 4
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
MoFi SourcePoint V10 |
Wharfedale Elysian 4 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.25-inch
|
27x90mm-inch
|
|
Midrange
|
- |
1 x 6-inch |
|
Woofer
|
2 x 10-inch
|
2 x 8.5-inch
|
SourcePoint V10 features a 1.25" Soft-Dome Tweeter and 2 x 10" Paper Pulp Woofer. On the other hand, the Elysian 4 features a 27x90mm" AMT (Ribbon) Tweeter, a 6" Midrange and 2 x 8.5" Coated Fiberglass Woofer with a Crossover frequency at 340Hz and 3100Hz.
Frequency Response
SourcePoint V10 has a frequency range of 27-30k Hz whereas Elysian 4 has a frequency range of 30-22k Hz. With a minimum frequency of 27Hz, the SourcePoint V10 can go slightly deeper then the Elysian 4's min frequency of 30Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint V10 is a 6 ohms speaker compared to the Elysian 4 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Elysian 4 can provide this impedance level.
These two speakers also have different sensitivity levels. SourcePoint V10 sensitivity is rated at 91 dB and the Elysian 4's is rated at 92 dB. This 1 dB difference makes the Wharfedale Elysian 4 a more sensitive speaker compared to MoFi SourcePoint V10, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Elysian 4 can handle a max power of 250 watts RMS, whereas SourcePoint V10 has a max power handling value of 200 watts RMS, 50 watts less than the Elysian 4.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both SourcePoint V10 and Elysian 4 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint V10's and Wharfedale Elysian 4's external dimensions. MoFi SourcePoint V10 has external dimensions of 1240.0 x 396.0 x 507.0mm (48-13/16inch x 15-9/16inch x 19-15/16inch) whereas Wharfedale Elysian 4 has external dimensions of 1188.0 x 402.0 x 462.0mm (46-3/4 x 15-13/16 x 18-3/16inch).
Wharfedale Elysian 4 is 52mm shorter and 45mm less deeper than MoFi SourcePoint V10 but it is also 6mm wider.
Below you can see the front view size comparison of MoFi SourcePoint V10 and Wharfedale Elysian 4 in scale.
Comparison image of MoFi SourcePoint V10 and Wharfedale Elysian 4 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2 and base area of the Wharfedale Elysian 4 is approximately 1857.2cm2 / 287.9inch2. The SourcePoint V10 requires 8% more surface area than the Elysian 4 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MoFi SourcePoint V10 weighs 72.73kg / 160lbs and the Wharfedale Elysian 4 weighs 49.60kg / 109.1lbs. This makes the SourcePoint V10 47% heavier than the Elysian 4.
Here is a comparison of how SourcePoint V10 and Elysian 4's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of MoFi SourcePoint V10?
Here are the items that are included inside the box of SourcePoint V10:
- Floorstanding loudspeaker
- Grille
- 4 Isolation feet
- 4 Spike feet
- 4 Threaded-rods
- 4 Locking-rings
- 2 Jumper-plates (pre-installed)
- User Manual
What's in the Box of Wharfedale Elysian 4?
Here are the items that come with the Elysian 4:
- Floorstanding loudspeaker
- Grille
- 2 Terminal-jumpers (pre-installed)
- 4 Spike feet
- User Manual
Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
10 inches
vs
8.5 inches
|
Larger woofer |
Low Frequency Response |
27 Hz
vs
30 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
22k Hz
|
Generates higher frequency |
Price per pair* |
7994USD
vs
9996USD
|
costs less (*prices may change depending on the seller, location and time) |
Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
92 dB
vs
91 dB
|
Play louder with same amount of amplification power |
Height |
1188mm
vs
1240mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1857cm2
vs
2007cm2
|
Takes less floor space |
| General |
MoFi SourcePoint V10 |
Wharfedale Elysian 4 |
| Brand |
MoFi |
Wharfedale |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 200 watts |
15-250 watts |
| Sensitivity |
91 dB |
92 dB |
| Impedance |
6 ohms |
4 ohms |
| Frequency Response |
27-30k Hz |
30-22k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
10" |
8.5" |
| Woofer Composition |
Paper Pulp |
Coated Fiberglass |
| Woofer Surround Material |
Rubber |
Foamed Rubber |
| Tweeter Size |
1.25" |
27x90mm" |
| Tweeter Type |
Soft-Dome |
AMT (Ribbon) |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
10" |
6" |
| Crossover Frequency |
n/a |
340Hz and 3100Hz |
| Firing Direction |
n/a |
bottom |
Physical Specs |
|
|
| Height |
1240.0mm (48.8") |
1188.0mm (46.8") |
| Width |
396.0mm (15.6") |
402.0mm (15.8") |
| Depth |
507.0mm (20") |
462.0mm (18.2") |
| Weight |
72.73kg (160lbs) |
49.60kg (109.1lbs) |
| Enclosure |
|
Bass Reflex |
| Finish |
MDF/wood-veneer |
MDF/Lacquer |
| Available Colors |
Black |
Piano Black, Piano Walnut,White |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
A generation apart: MoFi SourcePoint V10 is the newer design, against a 2020 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | A | MoFi SourcePoint V10 digs deeper - 27Hz against 30Hz. A subwoofer would even that out. |
| Amplifier needs | evenly matched | Similar sensitivity (91dB vs 92dB) - both want much the same power. |
| Amplifier match | A | MoFi SourcePoint V10 is the easier load at 6 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | B | Wharfedale Elysian 4 takes more power (250W vs 200W) - more in hand in a big room. |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Cabinet | depends | Passive Radiator vs Ported. |
| Expandability | depends | MoFi SourcePoint V10: bi-amping; Wharfedale Elysian 4: bi-amping. |
| Price | A | MoFi SourcePoint V10 is cheaper - $7,994 against $9,996, about 20% less. |
A MoFi SourcePoint V10 B Wharfedale Elysian 4
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
MoFi SourcePoint V10 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If your amplifier is modest, vintage or valve-based, MoFi SourcePoint V10 is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.