In this review, we will be comparing SourcePoint V10 and Aria 948, two Passive Floor-standing speakers from MoFi and Focal.
Let's have a brief look at the main features
of MoFi SourcePoint V10 and Focal Aria 948 first before getting into our more
detailed comparison.
| Key Specs | MoFi SourcePoint V10 | Focal Aria 948 |
|---|
| Brand | MoFi United States · founded 2016 | Focal France · founded 1979 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1.25" Soft-Dome | 1" inverted dome |
|---|
| Midrange | — | 6.5" |
|---|
| Woofer | 2 x 10" Paper Pulp | 2 x 8.25" Flax |
|---|
| Frequency response | 27-30k Hz | 37-28k Hz |
|---|
| Sensitivity | 91 dB | 92.5 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | up to 200 watts | 50-350 watts |
|---|
| Weight | 72.73kg / 160lbs | 35.00kg / 77lbs |
|---|
| Dimensions (H x W x D) | 48-13/16" x 15-9/16" x 19-15/16" 1240.0 x 396.0 x 507.0mm | 45-1/4" x 14-5/8" x 16-9/16" 1150.0 x 372.0 x 421.0mm |
|---|
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that SourcePoint V10 is a 2-way design whereas the Aria 948 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
MoFi SourcePoint V10Focal Aria 948
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
MoFi SourcePoint V10 |
Focal Aria 948 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.25-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
2 x 10-inch
|
2 x 8.25-inch
|
SourcePoint V10 features a 1.25" Soft-Dome Tweeter and 2 x 10" Paper Pulp Woofer. On the other hand, the Aria 948 features a 1" TNF Al/Mg inverted dome Tweeter, a 6.5" Midrange and 2 x 8.25" Flax Woofer with a Crossover frequency at 280Hz and 2,600Hz.
Frequency Response
SourcePoint V10 has a frequency range of 27-30k Hz whereas Aria 948 has a frequency range of 37-28k Hz. With a minimum frequency of 27Hz, the SourcePoint V10 can go significantly deeper on the low side and provide stronger bass compared to the Aria 948's min frequency of 37Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint V10 is a 6 ohms speaker compared to the Aria 948 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. SourcePoint V10 sensitivity is rated at 91 dB and the Aria 948's is rated at 92.5 dB. This 2 dB difference makes the Focal Aria 948 a more sensitive speaker compared to MoFi SourcePoint V10, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Aria 948 can handle a max power of 350 watts RMS, whereas SourcePoint V10 has a max power handling value of 200 watts RMS, 150 watts less than the Aria 948.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
SourcePoint V10 features Binding post posts which make bi-amping or bi-wiring possible. Aria 948 has a Binding post which doesn't feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint V10's and Focal Aria 948's external dimensions. MoFi SourcePoint V10 has external dimensions of 1240.0 x 396.0 x 507.0mm (48-13/16inch x 15-9/16inch x 19-15/16inch) whereas Focal Aria 948 has external dimensions of 1150.0 x 372.0 x 421.0mm (45-1/4 x 14-5/8 x 16-9/16inch).
MoFi SourcePoint V10 is clearly the larger of the two speakers. Its body is 24mm wider, 90mm taller and 86mm deeper than Focal Aria 948.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
MoFi SourcePoint V10 needs about 28% more floor or shelf area. MoFi SourcePoint V10 is 86mm deeper, so it stands that much further out from the wall. MoFi SourcePoint V10 is 90mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2 and base area of the Focal Aria 948 is approximately 1566.1cm2 / 242.7inch2. The SourcePoint V10 requires 28% more surface area than the Aria 948 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MoFi SourcePoint V10 weighs 72.73kg / 160lbs and the Focal Aria 948 weighs 35.00kg / 77lbs. This makes the SourcePoint V10 108% heavier than the Aria 948.
Here is a comparison of how SourcePoint V10 and Aria 948's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of MoFi SourcePoint V10?
Here are the items that are included inside the box of SourcePoint V10:
- Floorstanding loudspeaker
- Grille
- 4 Isolation feet
- 4 Spike feet
- 4 Threaded-rods
- 4 Locking-rings
- 2 Jumper-plates (pre-installed)
- User Manual
What's in the Box of Focal Aria 948?
Here are the items that come with the Aria 948:
- Floorstanding loudspeaker
- Grille
- Base
- 4 Spike feet (pre-installed in base)
- 4 Plastic feet
- 4 Screws
- Allen-key
- Hex-tool
- User Manual
Woofer Size |
10 inches
vs
8.25 inches
|
Larger woofer |
Low Frequency Response |
27 Hz
vs
37 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
Max Input Power |
350 watts
vs
200 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Sensitivity |
93 dB
vs
91 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
Height |
1150mm
vs
1240mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1566cm2
vs
2007cm2
|
Takes less floor space |
Price per pair* |
6598USD
vs
7994USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MoFi SourcePoint V10 |
Focal Aria 948 |
| Brand |
MoFi |
Focal |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 200 watts |
50-350 watts |
| Sensitivity |
91 dB |
92.5 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
n/a |
2.5 ohms |
| Frequency Response |
27-30k Hz |
37-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
10" |
8.25" |
| Woofer Composition |
Paper Pulp |
Flax |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.25" |
1" |
| Tweeter Type |
Soft-Dome |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
10" |
6.5" |
| Crossover Frequency |
n/a |
280Hz and 2,600Hz |
Physical Specs |
|
|
| Height |
1240.0mm (48.8") |
1150.0mm (45.3") |
| Width |
396.0mm (15.6") |
372.0mm (14.6") |
| Depth |
507.0mm (20") |
421.0mm (16.6") |
| Weight |
72.73kg (160lbs) |
35.00kg (77lbs) |
| Enclosure |
|
Bass Reflex |
| Finish |
MDF/wood-veneer |
MDF/Glass/Leather |
| Available Colors |
Black |
Gloss Black |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
A generation apart: MoFi SourcePoint V10 is the newer design, against a 2013 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | A | MoFi SourcePoint V10 digs deeper - 27Hz against 37Hz. |
| Amplifier needs | B | Focal Aria 948 is more sensitive (93dB vs 91dB), so it goes louder on the same amplifier. |
| Amplifier match | B | Focal Aria 948 is the easier load at 8 ohms. |
| Headroom | B | Focal Aria 948 takes more power (350W vs 200W) - more in hand in a big room. |
| Size | depends | Focal Aria 948 is easier to place; MoFi SourcePoint V10 is bigger, which usually goes with fuller bass. Your room decides. |
| Cabinet | depends | Passive Radiator vs Ported. |
| Expandability | depends | MoFi SourcePoint V10: bi-amping. Focal Aria 948 sits in a wider range (7 models), so a matched surround system is easier later. |
| Price | B | Focal Aria 948 is cheaper - $6,598 against $7,994, about 17% less. |
A MoFi SourcePoint V10 B Focal Aria 948
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Focal Aria 948 is the easier recommendation: it leads on most of the measured areas and costs less. Take MoFi SourcePoint V10 if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 37Hz anyway, which makes the cheaper Focal Aria 948 much easier to justify. If your amplifier is modest, vintage or valve-based, Focal Aria 948 is the safer partner - the other will want more current or more watts to sound its best.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.