In this review, we will be comparing Motion 15 and Motion 35XTi, two Passive Bookshelf speakers by MartinLogan Let's have a brief look at the main features
of MartinLogan 15 and MartinLogan 35XTi first before getting into our more
detailed comparison.
Motion 15 and Motion 35XTi are members of MartinLogan's Motion series of speakers. Below you can find the loudspeakers from this series.
MartinLogan Motion Series History
What size room are the MartinLogan 15 and MartinLogan 35XTi speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan 15 and MartinLogan 35XTi compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Motion 15 and Motion 35XTi are 2-way speakers.
| Driver |
MartinLogan 15 |
MartinLogan 35XTi |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.0 x 1.4-inch
|
1.25 x 2.4-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Motion 15 features a 1.0 x 1.4" Folded Motion Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2700Hz. On the other hand, the Motion 35XTi features a 1.25 x 2.4" Folded Motion XT Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Motion 15 has a frequency range of 60-25k Hz whereas Motion 35XTi has a frequency range of 50-25k Hz. With a minimum frequency of 50Hz, the Motion 35XTi can go significantly deeper on the low side and provide stronger bass compared to the Motion 15's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion 15 is a 5 ohms speaker compared to the Motion 35XTi which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion 35XTi can provide this impedance level.
On the other hand, they have the same sensitivity of 92 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Motion 15 can handle a max power of 250 watts RMS from the amp the whereas Motion 15 has a max power handling value of 200 watts RMS , 50 watts less than the Motion 35XTi.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion 35XTi features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Motion 15 has a Custom 5-way tool-less binding posts which doesn't feature bi-amping/bi-wiring.
MartinLogan 35XTi's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Motion 15 and Motion 35XTi have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 15's and MartinLogan 35XTi's external dimensions. MartinLogan 15 has external dimensions of 290.0 x 173.0 x 240.0mm ( 11.4 x 6.8 x 9.4inch) whereas MartinLogan 35XTi has external dimensions of 343.0 x 192.0 x 300.0mm ( 13.5 x 7.5 x 11.8inch) .
MartinLogan 35XTi is clearly the larger of the two speakers. Its body is 19mm wider, 53mm taller and 60mm deeper than MartinLogan 15.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 15 is approximately 415.2cm2 / 64.4inch2 and base area of the MartinLogan 35XTi is approximately 576.0cm2 / 89.3inch2. The Motion 15 requires 28% less surface area than the Motion 35XTi which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan 15 weighs 5.40kg / 11.9lbs and the MartinLogan 35XTi weighs 8.40kg / 18.5lbs. This makes the Motion 35XTi 56% heavier than the Motion 15.
Here is a comparison of how Motion 15 and Motion 35XTi's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of MartinLogan 15?
Here are the items that are included inside the box of Motion 15:
Bookshelf loudspeaker Grille 4 Rubber feet Users Manual Warranty/Registration Information
What's in the Box of MartinLogan 35XTi?
Here are the items that come with the Motion 35XTi:
Bookshelf loudspeaker Grille 4 Rubber feet 2 Jumper-straps (pre-installed) Users Manual Warranty/Registration Information
 Nominal Impedance |
5 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Height |
290mm
vs
343mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
415cm2 (173x240mm)
vs
576cm2 (192x300mm)
|
Takes less floor space |
 Max Input Power |
250 watts
vs
200 watts
|
Handle more power from your amplifier |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
50 Hz
vs
60 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
| General |
MartinLogan Motion 15 |
MartinLogan Motion 35XTi |
| Brand |
MartinLogan |
MartinLogan |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-200 watts |
20-250 watts |
| Sensitivity |
92 dB |
92 dB |
| Impedance |
5 ohms |
4 ohms |
| Frequency Response |
60-25k Hz |
50-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Aluminum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.0 x 1.4" |
1.25 x 2.4" |
| Tweeter Type |
Folded Motion |
Folded Motion XT |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2700Hz |
2200Hz |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
Allow 72 hours of break-in at 90 dB |
Allow 72 hours of break-in at 90 dB |
Physical Specs |
|
|
| Height |
290.0mm (11.4") |
343.0mm (13.5") |
| Width |
173.0mm (6.8") |
192.0mm (7.6") |
| Depth |
240.0mm (9.4") |
300.0mm (11.8") |
| Weight |
5.40kg (11.9lbs) |
8.40kg (18.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Piano Lacquer |
MDF/Lacquer |
| Available Colors |
Gloss Black, Matt White, Red Walnut |
Gloss Black, Matt White, Red Walnut |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-30" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Yrs w/ Registration |
5 Years |
| Labor Warranty |
5 Yrs w/ Registration |
5 Years |