In this review, we will be comparing two different type of speakers by MartinLogan. MartinLogan ElectroMotion ESL is a Floor-standing speaker whereas the EFX is a Surround speaker.
Let's have a brief look at the main features
of MartinLogan ESL and MartinLogan EFX first before getting into our more
detailed comparison.
MartinLogan ESL Key Specs
- 2-way Design
- 8.6x34" curved electrostatic transducer Tweeter
- 8" high-excursion paper cone Woofer
- 42-22k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 6ohms
- Power Range:20-300watts
- Weight:16.14kg
- Dimensions (H x W x D): 53-1/8" x 9-5/16" x 16-1/2" ( 1350.0 x 237.0 x 420.0mm )
MartinLogan EFX Key Specs
- 2-way Design
- " Electrostatic Tweeter
- 6.5" Aluminium Woofer
- 68-22k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 6ohms
- Power Range:20-300watts
- Weight:11.10kg
- Dimensions (H x W x D): 48-3/4" x 9-3/8" x 6-1/2" ( 1239.0 x 238.0 x 165.0mm )
ESL and EFX are members of MartinLogan's ElectroMotion series of speakers. Below you can find the loudspeakers from this series.
MartinLogan ElectroMotion Series
History
What size room are the MartinLogan ESL and MartinLogan EFX speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
MartinLogan ESL |
MartinLogan EFX |
| Near-field |
Bad |
Good |
| Small Room |
Poor |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Average |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the MartinLogan ESL and MartinLogan EFX compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both ESL and EFX are 2-way speakers.
| Driver |
MartinLogan ESL |
MartinLogan EFX |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
8.6x34-inch
|
-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 8-inch
|
1 x 6.5-inch
|
ESL features a 8.6x34" curved electrostatic transducer Tweeter and 1 x 8" high-excursion paper cone Woofer . On the other hand, the EFX features a " Electrostatic panel Electrostatic Tweeter and 1 x 6.5" Aluminium Woofer with a Crossover frequency at 530Hz.
Frequency Response
ESL has a frequency range of 42-22k Hz whereas EFX has a frequency range of 68-22k Hz. With a minimum frequency of 42Hz, the ESL can go significantly deeper on the low side and provide stronger bass compared to the EFX's min frequency of 68Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
ESL and EFX have the same Impedance of 6 ohms but where they differ is the sensitivity levels. ESL sensitivity is rated at 91 dB and the EFX's is at 90 dB. This 1 dB difference makes the MartinLogan ESL a more sensitive speaker compared to MartinLogan EFX, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
ESL and EFX has the same power range of 20-300 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
ESL features Binding post type posts and EFX has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan ESL's and MartinLogan EFX's external dimensions. MartinLogan ESL has external dimensions of 1350.0 x 237.0 x 420.0mm ( 53-1/8 x 9-5/16 x 16-1/2inch) whereas MartinLogan EFX has external dimensions of 1239.0 x 238.0 x 165.0mm ( 48-3/4 x 9-3/8 x 6-1/2inch) .
MartinLogan EFX is 111mm shorter and 255mm less deeper than MartinLogan ESL but it is also 1mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan ESL is approximately 995.4cm2 / 154.3inch2 and base area of the MartinLogan EFX is approximately 392.7cm2 / 60.9inch2. The ESL requires 153% more surface area than the EFX which gives it a small disadvantage on placement in tight spaces.
What's in the Box of MartinLogan ESL?
Here are the items that are included inside the box of ESL:
- Floor-standing hybrid electrostatic loudspeaker
- AC power adapter (w/ attached 10-feet DC cord)
- Cloth grille (installed)
- 4 Pre-installed feet
- Users Manual (En/Fr)
- Product Registration Card