In this review, we will be comparing R-41M and TSi100, two Passive Bookshelf speakers from Klipsch and Polk Audio.
Let's have a brief look at the main features
of Klipsch R-41M and Polk TSi100 first before getting into our more
detailed comparison.
Klipsch R-41M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 4" Copper-spun IMG Woofer
- 68-21k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50watts
- Weight:3.20kg
- Dimensions (H x W x D): 287.0" x 5.7" x 7.8"( 287.0 x 146.0 x 200.0mm )
Polk TSi100 Key Specs
- 2-way Design
- 1" Dome Tweeter
- 5.25" Organic Fiber Woofer
- 61-24k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 8ohms
- Power Range:20-100watts
- Weight:4.53kg
- Dimensions (H x W x D): 279.4" x 7.0" x 10.1"( 279.4 x 177.8 x 259.0mm )
What size room are the Klipsch R-41M and Polk TSi100 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch R-41M |
Polk TSi100 |
| Near-field |
Good |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch R-41M and Polk TSi100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-41M and TSi100 are 2-way speakers.
| Driver |
Klipsch R-41M |
Polk TSi100 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 4-inch
|
1 x 5.25-inch
|
R-41M features a 1" Tractrix Horn Tweeter and 1 x 4" Copper-spun IMG Woofer with a Crossover frequency at 1730Hz. On the other hand, the TSi100 features a 1" Dome Tweeter and 1 x 5.25" Organic Fiber Woofer with a Crossover frequency at 2500Hz.
Frequency Response
R-41M has a frequency range of 68-21k Hz whereas TSi100 has a frequency range of 61-24k Hz. With a minimum frequency of 61Hz, the TSi100 can go significantly deeper on the low side and provide stronger bass compared to the R-41M's min frequency of 68Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R-41M and TSi100 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R-41M sensitivity is rated at 90 dB and the TSi100's is at 89 dB. This 1 dB difference makes the Klipsch R-41M a more sensitive speaker compared to Polk TSi100, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
R-41M can handle a max power of 100 watts RMS from the amp the whereas R-41M has a max power handling value of 50 watts RMS , 50 watts less than the TSi100.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R-41M features Pair of 5-way Binding Posts - Gold-Plated type posts and TSi100 has a Pair of 5-way Binding Posts - Gold-Plated type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch R-41M's Single Gold Plated Binding Posts terminals
Cabinet Type and Port Position
Both R-41M and TSi100 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-41M's and Polk TSi100's external dimensions. Klipsch R-41M has external dimensions of 287.0 x 146.0 x 200.0mm ( 11.2 x 5.7 x 7.8inch) whereas Polk TSi100 has external dimensions of 279.4 x 177.8 x 259.0mm ( 11.0 x 7.0 x 10.1inch) .
Klipsch R-41M is 31.8mm narrower and 59mm less deeper than Polk TSi100 but it is also 7.6mm taller.
Below you can see the front view size comparison of Klipsch R-41M and Polk TSi100 in scale.
Comparison image of Klipsch R-41M and Polk TSi100 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-41M is approximately 292.0cm2 / 45.3inch2 and base area of the Polk TSi100 is approximately 460.5cm2 / 71.4inch2. The R-41M requires 37% less surface area than the TSi100 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Klipsch R-41M and Polk TSi100 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch R-41M weighs 3.20kg / 7lbs and the Polk TSi100 weighs 4.53kg / 10lbs. This makes the TSi100 42% heavier than the R-41M.
Here is a comparison of how R-41M and TSi100's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Klipsch R-41M?
Here are the items that are included inside the box of R-41M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet Quick Setup Guide Important Safety Instructions Warranty Information
What's in the Box of Polk TSi100?
Here are the items that come with the TSi100:
2 Black bookshelf speakers Detachable cloth grille (installed) 8 Self-adhesive rubber feet Owner's Manual Wall-Mount template Online registration sheet Polk Audio product brochure
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Base Surface Area |
292cm2
vs
460cm2
|
Takes less floor space |
 Max Input Power |
100 watts
vs
50 watts
|
Handle more power from your amplifier |
 Woofer Size |
5.25 inches
vs
4 inches
|
Larger woofer |
|
Low Frequency Response |
61 Hz
vs
68 Hz
|
Generates deeper bass |
 High Frequency Response |
24k Hz
vs
21k Hz
|
Generates higher frequency |
 Height |
279mm
vs
287mm
|
Easier to fit in smaller spaces |
 Price per pair* |
149USD
vs
229USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference R-41M |
Polk Audio TSi100 |
| Brand |
Klipsch |
Polk Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
50 watts |
20-100 watts |
| Sensitivity |
90 dB |
89 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
68-21k Hz |
61-24k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
4" |
5.25" |
| Woofer Composition |
Copper-spun IMG |
Organic Fiber |
| Woofer Surround Material |
Rubber |
Butyl Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix Horn |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1730Hz |
2500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
287.0mm (11.3") |
279.4mm (11") |
| Width |
146.0mm (5.7") |
177.8mm (7") |
| Depth |
200.0mm (7.9") |
259.0mm (10.2") |
| Weight |
3.20kg (7lbs) |
4.53kg (10lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
Wood-grain vinyl |
| Available Colors |
Black |
Black, Cherry |
| Mounting Bracket |
Keyhole |
Keyhole |
| Recommended Stand Height |
26-31" |
16-30" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |