In this review, we will be comparing AK7 and Triton Five, two Passive Floor-standing speakers from Klipsch and GoldenEar.
Let's have a brief look at the main features
of Klipsch Klipschorn AK7 and GoldenEar Triton Five first before getting into our more
detailed comparison.
Klipsch Klipschorn AK7 Key Specs
- 3-way Design
- 1" Tractrix horn Tweeter
- 3" Midrange
- 15" fiber-composite with a trihedral exponential folded horn Woofer
- 34-19k Hz Frequency Response
- 103 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 100watts
- Weight:118.00kg
- Dimensions (H x W x D): 1347.0" x 31-1/4" x 28-1/4"( 1347.0 x 794.0 x 718.0mm )
GoldenEar Triton Five Key Specs
- 2-way Design
- " Folded Ribbon Tweeter
- 2 x 6" Polypropylene Woofer
- 26-35k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:15-400watts
- Weight:18.18kg
- Dimensions (H x W x D): 1131.0" x 11-1/16" x 16-9/16"( 1131.0 x 281.0 x 421.0mm )
In the following sections, we will get into more detail in order to better understand how the Klipsch Klipschorn AK7 and GoldenEar Triton Five compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that AK7 is a 3-way design whereas the Triton Five is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Klipsch Klipschorn AK7 |
GoldenEar Triton Five |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
-inch
|
|
Midrange
|
1 x 3-inch |
- |
|
Woofer
|
1 x 15-inch
|
2 x 6-inch
|
AK7 features a 1" polyimide diaphragm compression Tractrix horn Tweeter , a 3" Midrange and 1 x 15" fiber-composite with a trihedral exponential folded horn Woofer with a Crossover frequency at 380Hz - 290Hz. On the other hand, the Triton Five features a " Folded Ribbon Tweeter and 2 x 6" Polypropylene Woofer .
Frequency Response
AK7 has a frequency range of 34-19k Hz whereas Triton Five has a frequency range of 26-35k Hz. With a minimum frequency of 26Hz, the Triton Five can go significantly deeper on the low side and provide stronger bass compared to the AK7's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AK7 and Triton Five have the same Impedance of 8 ohms but where they differ is the sensitivity levels. AK7 sensitivity is rated at 103 dB and the Triton Five's is at 90 dB. This 13 dB difference makes the Klipsch Klipschorn AK7 a more sensitive speaker compared to GoldenEar Triton Five, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
AK7 can handle a max power of 400 watts RMS from the amp the whereas AK7 has a max power handling value of 100 watts RMS , 300 watts less than the Triton Five.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
AK7 features Binding post posts which make bi-amping or bi-wiring possible. Triton Five has a 5-way Post which doesn't feature bi-amping/bi-wiring.
Klipsch Klipschorn AK7's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch Klipschorn AK7's and GoldenEar Triton Five's external dimensions. Klipsch Klipschorn AK7 has external dimensions of 1347.0 x 794.0 x 718.0mm ( 53 x 31-1/4 x 28-1/4inch) whereas GoldenEar Triton Five has external dimensions of 1131.0 x 281.0 x 421.0mm ( 44-1/2 x 11-1/16 x 16-9/16inch) .
Klipsch Klipschorn AK7 is clearly the larger of the two speakers. Its body is 513mm wider, 216mm taller and 297mm deeper than GoldenEar Triton Five.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch Klipschorn AK7 is approximately 5700.9cm2 / 883.6inch2 and base area of the GoldenEar Triton Five is approximately 1183.0cm2 / 183.4inch2. The AK7 requires 382% more surface area than the Triton Five which gives it a small disadvantage on placement in tight spaces.