In this review, we will be comparing R11 Meta and Silver 500 7G, two Passive Floor-standing speakers from KEF and Monitor Audio.
Let's have a brief look at the main features
of KEF R11 Meta and Monitor Audio Silver 500 7G first before getting into our more
detailed comparison.
| Key Specs | KEF R11 Meta | Monitor Audio Silver 500 7G |
|---|
| Brand | KEF United Kingdom · founded 1961 | Monitor Audio United Kingdom · founded 1972 |
|---|
| Design | 3-way | 3-way |
|---|
| Uni-Q driver | 12th Generation Uni-Q | — |
|---|
| Tweeter | 1" Vented dome | 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
|---|
| Midrange | 5" | 3" |
|---|
| Woofer | 4 x 6.5" Hybrid Aluminum | 2 x 8" C-CAM RST II |
|---|
| Frequency response | 46-28k Hz | 27-35k Hz |
|---|
| Sensitivity | 90 dB | 90.5 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 15-300 watts | 80-250 watts |
|---|
| Weight | 36.59kg / 80.5lbs | 22.53kg / 49.6lbs |
|---|
| Dimensions (H x W x D) | 51" x 12-1/4" x 15-1/8" 1296.0 x 312.0 x 385.0mm | 42-11/16" x 12-11/16" x 15-7/16" 1085.0 x 323.0 x 393.0mm |
|---|
What size room are the KEF R11 Meta and Monitor Audio Silver 500 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
KEF R11 Meta |
Monitor Audio Silver 500 7G |
| Near-field |
Are you nuts? |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Good |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R11 Meta and Silver 500 7G are 3-way speakers.
KEF R11 MetaMonitor Audio Silver 500 7G
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
KEF R11 Meta |
Monitor Audio Silver 500 7G |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5-inch |
1 x 3-inch |
|
Woofer
|
4 x 6.5-inch
|
2 x 8-inch
|
R11 Meta features a 1" Aluminum with MAT absorber Vented dome Tweeter, a 5" Midrange and 4 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 330Hz and 2500Hz. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter, a 3" Midrange and 2 x 8" C-CAM RST II Woofer.
Frequency Response
R11 Meta has a frequency range of 46-28k Hz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go significantly deeper on the low side and provide stronger bass compared to the R11 Meta's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R11 Meta is a 4 ohms speaker compared to the Silver 500 7G which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the R11 Meta can provide this impedance level.
These two speakers also have different sensitivity levels. R11 Meta sensitivity is rated at 90 dB and the Silver 500 7G's is rated at 90.5 dB. This 1 dB difference makes the Monitor Audio Silver 500 7G a more sensitive speaker compared to KEF R11 Meta, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
R11 Meta can handle a max power of 300 watts RMS, whereas Silver 500 7G has a max power handling value of 250 watts RMS, 50 watts less than the R11 Meta.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Monitor Audio Silver 500 7G
Input Type and Bi-Amping / Bi-Wiring
Both R11 Meta and Silver 500 7G features dual binding post speaker terminals for bi-amping or bi-wiring.
KEF R11 Meta's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both R11 Meta and Silver 500 7G have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF R11 Meta Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF R11 Meta's and Monitor Audio Silver 500 7G's external dimensions. KEF R11 Meta has external dimensions of 1296.0 x 312.0 x 385.0mm (51-inch x 12-1/4-inch x 15-1/8-inch) whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm (42-11/16 x 12-11/16 x 15-7/16inch).
KEF R11 Meta is 11mm narrower and 8mm less deeper than Monitor Audio Silver 500 7G but it is also 211mm taller.
Below you can see the front view size comparison of KEF R11 Meta and Monitor Audio Silver 500 7G in scale.
Comparison image of KEF R11 Meta and Monitor Audio Silver 500 7G Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF R11 Meta is approximately 1201.2cm2 / 186.2inch2 and base area of the Monitor Audio Silver 500 7G is approximately 1269.4cm2 / 196.8inch2. The R11 Meta requires 5% less surface area than the Silver 500 7G which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF R11 Meta weighs 36.59kg / 80.5lbs and the Monitor Audio Silver 500 7G weighs 22.53kg / 49.6lbs. This makes the R11 Meta 62% heavier than the Silver 500 7G.
Here is a comparison of how R11 Meta and Silver 500 7G's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Monitor Audio Silver 500 7G
What's in the Box of KEF R11 Meta?
Here are the items that are included inside the box of R11 Meta:
- R11 Meta
- Microfiber grille
- Plinth and spike accessories
- Port bungs
- User manual and warranty information
What's in the Box of Monitor Audio Silver 500 7G?
Here are the items that come with the Silver 500 7G:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet
- 4 Rubber feet (pre-installed on outrigger feet)
- 4 Spikes
- 4 Bolts
- 4 Machine screws
- 2 Foam port plugs
- 2 Hex-keys
- Owners Manual
- Important Safety Instructions
Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
Number of Woofers |
4
vs
2
|
More woofers |
Base Surface Area |
1201cm2
vs
1269cm2
|
Takes less floor space |
Sensitivity |
91 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
27 Hz
vs
46 Hz
|
Generates deeper bass |
High Frequency Response |
35k Hz
vs
28k Hz
|
Generates higher frequency |
Height |
1085mm
vs
1296mm
|
Easier to fit in smaller spaces |
Price per pair* |
3200USD
vs
6498USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF R11 Meta |
Monitor Audio Silver 500 7G |
| Brand |
KEF |
Monitor Audio |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
15-300 watts |
80-250 watts |
| Sensitivity |
90 dB |
90.5 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
3.2 ohms |
n/a |
| Frequency Response |
46-28k Hz |
27-35k Hz |
Drivers |
|
|
| Woofer Quantity |
4 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Hybrid Aluminum |
C-CAM RST II |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Vented dome |
gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5" |
3" |
| Crossover Frequency |
330Hz and 2500Hz |
n/a |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1296.0mm (51") |
1085.0mm (42.7") |
| Width |
312.0mm (12.3") |
323.0mm (12.7") |
| Depth |
385.0mm (15.2") |
393.0mm (15.5") |
| Weight |
36.59kg (80.5lbs) |
22.53kg (49.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
Black Gloss, White Gloss, Walnut |
Oak |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 years |
5 Years |
| Labor Warranty |
5 years |
5 Years |
These sit in different price classes - KEF R11 Meta costs roughly 2x what Monitor Audio Silver 500 7G does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | B | Monitor Audio Silver 500 7G digs deeper - 27Hz against 46Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (90dB vs 91dB) - both want much the same power. |
| Amplifier match | B | Monitor Audio Silver 500 7G is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | evenly matched | Similar power handling (300W vs 250W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | KEF R11 Meta: bi-amping; Monitor Audio Silver 500 7G: bi-amping. |
| Price | B | Monitor Audio Silver 500 7G is cheaper - $3,200 against $6,498, about 51% less; arguably a different class. |
A KEF R11 Meta B Monitor Audio Silver 500 7G
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Monitor Audio Silver 500 7G is the easier recommendation: it leads on most of the measured areas and costs less. Take KEF R11 Meta if its size, looks or fit in your room suit you better. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 46Hz anyway, so judge these on the other rows instead. Match it to your room: we rate KEF R11 Meta the better fit for a very large room; elsewhere the two are rated the same.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.