In this review, we will be comparing two different type of speakers by KEF. KEF LS50C Meta is a Center Channel speaker whereas the LS50 Meta is a Bookshelf speaker.
Let's have a brief look at the main features
of KEF LS50C Meta and KEF LS50 Meta first before getting into our more
detailed comparison.
LS50C Meta and LS50 Meta are members of KEF's LS series of speakers. Below you can find the loudspeakers from this series.
What size room are the KEF LS50C Meta and KEF LS50 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF LS50C Meta and KEF LS50 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both LS50C Meta and LS50 Meta are 2-way speakers.
| Driver |
KEF LS50C Meta |
KEF LS50 Meta |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
LS50C Meta features a 1" Aluminum Vented dome Tweeter and 1 x 5.25" aluminum Woofer with a Crossover frequency at 2100Hz. On the other hand, the LS50 Meta features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2100Hz.
Frequency Response
LS50C Meta and LS50 Meta has exactly the same frequency range of 79-28k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
LS50C Meta and LS50 Meta have the same Impedance of 8 ohms and their sensitivity is also same at 85 dB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
LS50C Meta and LS50 Meta has the same power range of 40-100 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
LS50C Meta features Post type posts and LS50 Meta has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF LS50C Meta's Binding post terminals
KEF LS50 Meta's Post terminals
Cabinet Type and Port Position
Both LS50C Meta and LS50 Meta have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
KEF LS50C Meta off-set flexible Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LS50C Meta's and KEF LS50 Meta's external dimensions. KEF LS50C Meta has external dimensions of 301.0 x 201.0 x 281.0mm ( 11-13/16 x 7-7/8 x 11-1/16inch) whereas KEF LS50 Meta has external dimensions of 303.0 x 201.0 x 281.0mm ( 11-15/16 x 7.875 x 11-1/16inch) .
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LS50C Meta is approximately 564.8cm2 / 87.5inch2 and base area of the KEF LS50 Meta is approximately 564.8cm2 / 87.5inch2.
What's in the Box of KEF LS50C Meta?
Here are the items that are included inside the box of LS50C Meta:
Center-channel loudspeakerFoam port plug4 Self-adhesive rubber feetOwners ManualWarranty Registration Card
What's in the Box of KEF LS50 Meta?
Here are the items that come with the LS50 Meta:
2 Bookshelf loudspeakers2 Foam port plugs8 Self-adhesive rubber feetOwners ManualWarranty Registration Card