In this review, we will be comparing LS50 Meta and LS50, two Passive Bookshelf speakers by KEF Let's have a brief look at the main features
of KEF LS50 Meta and KEF LS50 first before getting into our more
detailed comparison.
LS50 Meta and LS50 are members of KEF's LS series of speakers. Below you can find the loudspeakers from this series.
What size room are the KEF LS50 Meta and KEF LS50 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the KEF LS50 Meta and KEF LS50 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both LS50 Meta and LS50 are 2-way speakers.
| Driver |
KEF LS50 Meta |
KEF LS50 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 5.25-inch
|
LS50 Meta features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2100Hz. On the other hand, the LS50 features a 1" Aluminum Vented dome Tweeter and 1 x 5.25" Magnesium/aluminum alloy Woofer with a Crossover frequency at 2200Hz.
Frequency Response
LS50 Meta and LS50 has exactly the same frequency range of 79-28k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
LS50 Meta and LS50 have the same Impedance of 8 ohms and their sensitivity is also same at 85 dB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
LS50 Meta features Post type posts and LS50 has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
KEF LS50 Meta's Post terminals
KEF LS50's Post terminals
Cabinet Type and Port Position
Both LS50 Meta and LS50 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LS50 Meta's and KEF LS50's external dimensions. KEF LS50 Meta has external dimensions of 303.0 x 201.0 x 281.0mm ( 11-15/16 x 7.875 x 11-1/16inch) whereas KEF LS50 has external dimensions of 302.0 x 200.0 x 278.0mm ( 11.8 x 7.8 x 10.9inch) .
KEF LS50 Meta is clearly the larger of the two speakers. Its body is 1mm wider, 1mm taller and 3mm deeper than KEF LS50.
Below you can see the front view size comparison of KEF LS50 Meta and KEF LS50 in scale.
Comparison image of KEF LS50 Meta and KEF LS50 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LS50 Meta is approximately 564.8cm2 / 87.5inch2 and base area of the KEF LS50 is approximately 556.0cm2 / 86.2inch2. The LS50 Meta requires 2% more surface area than the LS50 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of KEF LS50 Meta and KEF LS50 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF LS50 Meta weighs 7.82kg / 17.2lbs and the KEF LS50 weighs 7.20kg / 15.8lbs. This makes the LS50 Meta 9% heavier than the LS50.
Here is a comparison of how LS50 Meta and LS50's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LS50 Meta?
Here are the items that are included inside the box of LS50 Meta:
2 Bookshelf loudspeakers2 Foam port plugs8 Self-adhesive rubber feetOwners ManualWarranty Registration Card
What's in the Box of KEF LS50?
Here are the items that come with the LS50:
2 Bookshelf loudspeakers 2 Foam port plugs 8 Self-adhesive rubber feet Owner's Manual Warranty Registration Card
 Uni-Q Driver |
12th Generation
vs
11th Generation
|
Newer generation Driver |
 Minimum Impedance |
3.5 ohms
vs
3.2 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Height |
302mm
vs
303mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
556cm2 (200x278mm)
vs
564cm2 (201x281mm)
|
Takes less floor space |
| General |
KEF LS50 Meta |
KEF LS50 |
| Brand |
KEF |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
40-100 watts |
25-100 watts |
| Sensitivity |
85 dB |
85 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.5 ohms |
3.2 ohms |
| Frequency Response |
79-28k Hz |
79-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
5.25" |
| Woofer Composition |
Aluminum |
Magnesium/aluminum alloy |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Vented dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2100Hz |
2200Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
303.0mm (11.9") |
302.0mm (11.9") |
| Width |
201.0mm (7.9") |
200.0mm (7.9") |
| Depth |
281.0mm (11.1") |
278.0mm (10.9") |
| Weight |
7.82kg (17.2lbs) |
7.20kg (15.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Polymer |
Polymer/Lacquer |
| Available Colors |
Carbon Black,Titanium Grey,Royal Blue,Mineral White |
Black, High Gloss Piano Black, High Gloss Piano White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
25-30" |
18-28" |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |