In this review, we will be comparing LS50 Wireless II and LSX II LT, two Powered Bookshelf speakers by KEF Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of KEF LS50 Wireless II and KEF LSX II LT first before getting into our more
detailed comparison.
LS50 Wireless II and LSX II LT are members of KEF's LS series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the KEF LS50 Wireless II and KEF LSX II LT compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both LS50 Wireless II and LSX II LT are 2-way speakers.
| Driver |
KEF LS50 Wireless II |
KEF LSX II LT |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
0.75-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 4.5-inch
|
LS50 Wireless II features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Aluminum Woofer . On the other hand, the LSX II LT features a 0.75" Aluminum Hard-Dome Tweeter and 1 x 4.5" Magnesium/Aluminium alloy Woofer .
Frequency Response
LS50 Wireless II has a frequency range of 45-28k Hz whereas LSX II LT has a frequency range of 54-28k Hz. With a minimum frequency of 45Hz, the LS50 Wireless II can go significantly deeper on the low side and provide stronger bass compared to the LSX II LT's min frequency of 54Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both LS50 Wireless II and LSX II LT have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF LS50 Wireless II's and KEF LSX II LT's external dimensions. KEF LS50 Wireless II has external dimensions of 277.8 x 200.0 x 322.3mm ( 10.9375 x 7.875 x 12.6875inch) whereas KEF LSX II LT has external dimensions of 240 × 155 × 180 mm ( 9.5 × 6.1 × 7.1 inch) .
KEF LS50 Wireless II is clearly the larger of the two speakers. Its body is 45mm wider, 37.8mm taller and 142.3mm deeper than KEF LSX II LT.
Below you can see the front view size comparison of KEF LS50 Wireless II and KEF LSX II LT in scale.
Comparison image of KEF LS50 Wireless II and KEF LSX II LT Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF LS50 Wireless II is approximately 644.6cm2 / 99.9inch2 and base area of the KEF LSX II LT is approximately 279.0cm2 / 43.2inch2. The LS50 Wireless II requires 131% more surface area than the LSX II LT which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of KEF LS50 Wireless II and KEF LSX II LT on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The KEF LS50 Wireless II weighs 10.00kg / 22lbs and the KEF LSX II LT weighs 3.60kg / 7.9lbs. This makes the LS50 Wireless II 178% heavier than the LSX II LT.
Here is a comparison of how LS50 Wireless II and LSX II LT's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LS50 Wireless II?
Here are the items that are included inside the box of LS50 Wireless II:
2 Wireless powered speakersTwo 6.5-feet AC power cords10-feet Cat-6 interconnect speaker cableRemote control2 AAA batteries Quick Start Guide Important Safety Information Warranty Information
What's in the Box of KEF LSX II LT?
Here are the items that come with the LSX II LT:
2 Wireless powered speakers6.5-feet AC power cords3m - 10ft Interspeaker cableRemote control2 AAA batteries Quick Start Guide Important Safety Information Warranty Information Maintenance Guide
 Uni-Q Driver |
12th Generation
vs
11th Generation
|
Newer generation Driver |
 Woofer Size |
5.25 inches
vs
4.5 inches
|
Larger woofer |
| Low Frequency Response |
45 Hz
vs
54 Hz
|
Generates deeper bass |
 3.5mm Connection |
Yes
vs
No
|
Connection via 3.5mm AUX input |
 Height |
240mm
vs
277mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
279cm2 (155x180mm)
vs
644cm2 (200x322mm)
|
Takes less floor space |
 Price per pair* |
999USD
vs
2499USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
KEF LS50 Wireless II |
KEF LSX II LT |
| Brand |
KEF |
KEF |
| Speaker Type |
Powered Stereo Speakers |
Powered Stereo Speakers |
| Frequency Response |
45-28k Hz |
54-28k Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
380-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
760-watt RMS |
n/a |
| Max Bit Depth |
32-bit |
24-bit |
| Max Sample Rate |
384 kHz |
384 kHz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
4.5" |
| Woofer Composition |
Aluminum |
Magnesium/Aluminium alloy |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
0.75" |
| Tweeter Type |
Hard-Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
277.8mm (10.9") |
240.0mm (9.4") |
| Width |
200.0mm (7.9") |
155.0mm (6.1") |
| Depth |
322.3mm (12.7") |
180.0mm (7.1") |
| Weight |
10.00kg (22lbs) |
3.60kg (7.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Available Colors |
n/a |
Sage Green, Graphite Grey, Stone White |
| Mounting Bracket |
No |
No |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Aux Inputs |
3.5mm |
n/a |
| USB Port |
Service only |
USB-C (connects to your computer) |
| Phone Input |
No |
No |
| Subwoofer Output |
Wired |
Wired |
| Digital Input |
Optical, Coax |
Optical |
| HDMI Input |
eARC |
ARC |
| Headphone Jack |
No |
No |
| Ethernet Port |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
1 Year |
1 Year |
| Labor Warranty |
1 Year |
1 Year |