In this review, we will be comparing C 97 II and C 95 II, two Passive Floor-standing speakers by Jamo Let's have a brief look at the main features
of Jamo C 97 II and Jamo C 95 II first before getting into our more
detailed comparison.
C 97 II and C 95 II are members of Jamo's Concert 9 series of speakers. Below you can find the loudspeakers from this series.
Jamo Concert 9 Series History
What size room are the Jamo C 97 II and Jamo C 95 II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo C 97 II and Jamo C 95 II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that C 97 II is a 3-way design whereas the C 95 II is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Jamo C 97 II |
Jamo C 95 II |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
- |
|
Woofer
|
3 x 6-inch
|
2 x 6-inch
|
C 97 II features a 1" Tweeter , a 6" Midrange and 3 x 6" Composite Woofer . On the other hand, the C 95 II features a 1" Tweeter and 2 x 6" Composite Woofer .
Frequency Response
C 97 II has a frequency range of 32-24k Hz whereas C 95 II has a frequency range of 37-24k Hz. With a minimum frequency of 32Hz, the C 97 II can go significantly deeper on the low side and provide stronger bass compared to the C 95 II's min frequency of 37Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
C 97 II and C 95 II have the same Impedance of 6 ohms and their sensitivity is also same at 89 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
C 97 II can handle a max power of 180 watts RMS from the amp the whereas C 95 II has a max power handling value of 165 watts RMS, 15 watts less than the C 97 II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both C 97 II and C 95 II features dual binding post speaker terminals for bi-amping or bi-wiring.
Jamo C 97 II's Posts terminals allows Bi-amping or bi-wiring
Jamo C 95 II's Posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both C 97 II and C 95 II have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo C 97 II's and Jamo C 95 II's external dimensions. Jamo C 97 II has external dimensions of 1070.0 x 248.0 x 402.0mm ( 42-1/8 x 9-3/4 x 15-13/16inch) whereas Jamo C 95 II has external dimensions of 982.0 x 247.0 x 383.0mm ( 38-5/8 x 9-11/16 x 15-1/16inch) .
Jamo C 97 II is clearly the larger of the two speakers. Its body is 1mm wider, 88mm taller and 19mm deeper than Jamo C 95 II.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo C 97 II is approximately 997.0cm2 / 154.5inch2 and base area of the Jamo C 95 II is approximately 946.0cm2 / 146.6inch2. The C 97 II requires 5% more surface area than the C 95 II which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo C 97 II weighs 24.55kg / 54lbs and the Jamo C 95 II weighs 19.91kg / 43.8lbs. This makes the C 97 II 23% heavier than the C 95 II.
Here is a comparison of how C 97 II and C 95 II's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Jamo C 97 II?
Here are the items that are included inside the box of C 97 II:
Floorstanding loudspeakerGrille4 Outrigger feet4 Spikes (pre-installed on outrigger feet)4 Rubber feet8 Machine screws2 Jumper-straps (pre-installed)Hex-keyUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Jamo C 95 II?
Here are the items that come with the C 95 II:
Floorstanding loudspeakerGrille4 Outrigger feet4 Spikes (pre-installed on outrigger feet)4 Rubber feet8 Machine screws2 Jumper-straps (pre-installed)Hex-keyUser ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
180 watts
vs
165 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Number of Woofers |
3
vs
2
|
More woofers |
| Low Frequency Response |
32 Hz
vs
37 Hz
|
Generates deeper bass |
 Height |
982mm
vs
1070mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
946cm2 (247x383mm)
vs
997cm2 (248x402mm)
|
Takes less floor space |
 Price per pair* |
918USD
vs
1378USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Jamo Concert 9 Series C 97 II |
Jamo Concert 9 Series C 95 II |
| Brand |
Jamo |
Jamo |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-180 watts |
50-165 watts |
| Sensitivity |
89 dB |
89 dB |
| Impedance |
6 ohms |
6 ohms |
| Frequency Response |
32-24k Hz |
37-24k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
6" |
6" |
| Woofer Composition |
Composite |
Composite |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
1070.0mm (42.1") |
982.0mm (38.7") |
| Width |
248.0mm (9.8") |
247.0mm (9.7") |
| Depth |
402.0mm (15.8") |
383.0mm (15.1") |
| Weight |
24.55kg (54lbs) |
19.91kg (43.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |