In this review, we will be comparing C 95 II and S 807, two Passive Floor-standing speakers by Jamo Let's have a brief look at the main features
of Jamo C 95 II and Jamo S 807 first before getting into our more
detailed comparison.
What size room are the Jamo C 95 II and Jamo S 807 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Jamo C 95 II and Jamo S 807 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both C 95 II and S 807 are 2-way speakers.
| Driver |
Jamo C 95 II |
Jamo S 807 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6-inch
|
2 x 5-inch
|
C 95 II features a 1" Tweeter and 2 x 6" Composite Woofer . On the other hand, the S 807 features a 1" Tweeter and 2 x 5" Aluminized Polyfiber Woofer with a Crossover frequency at 2000Hz.
Frequency Response
C 95 II has a frequency range of 37-24k Hz whereas S 807 has a frequency range of 42-26k Hz. With a minimum frequency of 37Hz, the C 95 II can go significantly deeper on the low side and provide stronger bass compared to the S 807's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
C 95 II is a 6 ohms speaker compared to the S 807 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. C 95 II sensitivity is rated at 89 dB and the S 807's is rated at 90 dB. This 1 dB difference makes the Jamo S 807 a more sensitive speaker compared to Jamo C 95 II, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
C 95 II can handle a max power of 165 watts RMS from the amp the whereas S 807 has a max power handling value of 100 watts RMS, 65 watts less than the C 95 II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
C 95 II features Posts posts which make bi-amping or bi-wiring possible. S 807 has a Binding post which doesn't feature bi-amping/bi-wiring.
Jamo C 95 II's Posts terminals allows Bi-amping or bi-wiring
Jamo S 807's Binding post terminals
Cabinet Type and Port Position
C 95 II has a rear firing port whereas S 807 has a front firing ports. Jamo S 807's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Jamo C 95 II with its rear-firing port.
Jamo S 807 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Jamo C 95 II's and Jamo S 807's external dimensions. Jamo C 95 II has external dimensions of 982.0 x 247.0 x 383.0mm ( 38-5/8 x 9-11/16 x 15-1/16inch) whereas Jamo S 807 has external dimensions of 915.0 x 191.0 x 252.0mm ( 36-1/2 x 10-1/8 x 10-9/16inch) .
Jamo C 95 II is clearly the larger of the two speakers. Its body is 56mm wider, 67mm taller and 131mm deeper than Jamo S 807.
Below you can see the front view size comparison of Jamo C 95 II and Jamo S 807 in scale.
Comparison image of Jamo C 95 II and Jamo S 807 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Jamo C 95 II is approximately 946.0cm2 / 146.6inch2 and base area of the Jamo S 807 is approximately 481.3cm2 / 74.6inch2. The C 95 II requires 97% more surface area than the S 807 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Jamo C 95 II weighs 19.91kg / 43.8lbs and the Jamo S 807 weighs 11.80kg / 26lbs. This makes the C 95 II 69% heavier than the S 807.
Here is a comparison of how C 95 II and S 807's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Jamo C 95 II?
Here are the items that are included inside the box of C 95 II:
Floorstanding loudspeakerGrille4 Outrigger feet4 Spikes (pre-installed on outrigger feet)4 Rubber feet8 Machine screws2 Jumper-straps (pre-installed)Hex-keyUser ManualImportant Safety InstructionsWarranty Information
What's in the Box of Jamo S 807?
Here are the items that come with the S 807:
2 Floorstanding loudspeakers2 Grilles8 Mounting feet16 ScrewsUser ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
165 watts
vs
100 watts
|
Handle more power from your amplifier |
 Woofer Size |
6 inches
vs
5 inches
|
Larger woofer |
| Low Frequency Response |
37 Hz
vs
42 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 High Frequency Response |
26k Hz
vs
24k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Dolby Atmos Drivers |
Optional Jamo S 8 ATM Dolby Atmos upward-firing speakers
vs
No
|
Dolby Atmos Compatibility |
 Height |
915mm
vs
982mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
481cm2 (191x252mm)
vs
946cm2 (247x383mm)
|
Takes less floor space |
 Price per pair* |
519USD
vs
918USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Jamo Concert 9 Series C 95 II |
Jamo Studio S 807 |
| Brand |
Jamo |
Jamo |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-165 watts |
up to 100 watts |
| Sensitivity |
89 dB |
90 dB |
| Impedance |
6 ohms |
8 ohms |
| Frequency Response |
37-24k Hz |
42-26k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
5" |
| Woofer Composition |
Composite |
Aluminized Polyfiber |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2000Hz |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
982.0mm (38.7") |
915.0mm (36") |
| Width |
247.0mm (9.7") |
191.0mm (7.5") |
| Depth |
383.0mm (15.1") |
252.0mm (9.9") |
| Weight |
19.91kg (43.8lbs) |
11.80kg (26lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
| Available Colors |
Black |
Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |