In this review, we will be comparing Studio 2 55IW and UIW RSS II, two Passive In-wall speakers from JBL and Definitive Technology.
Let's have a brief look at the main features
of JBL Studio 2 55IW and Definitive UIW RSS II first before getting into our more
detailed comparison.
JBL Studio 2 55IW Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 2 x 5.25" PolyPlas Woofer
- 40-20kHz Frequency Response
- 88 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 120watts
- Dimensions (H x W x D): 359.0" x 6.4375" x 3.3750"( 359.0 x 164.0 x 86.0mm )
Definitive UIW RSS II Key Specs
- 2-way Design
- 1" Hard-Dome Tweeter
- 2 x 4.5" Polypropylene Woofer
- 26-30kHz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:10-250watts
- Dimensions (H x W x D): 296.0" x 9.8750" x 3.8750"( 296.0 x 251.0 x 99.0mm )
What size room are the JBL Studio 2 55IW and Definitive UIW RSS II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
JBL Studio 2 55IW |
Definitive UIW RSS II |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the JBL Studio 2 55IW and Definitive UIW RSS II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Studio 2 55IW and UIW RSS II are 2-way speakers.
| Driver |
JBL Studio 2 55IW |
Definitive UIW RSS II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 4.5-inch
|
Studio 2 55IW features a 1" Hard-Dome Tweeter and 2 x 5.25" PolyPlas Woofer . On the other hand, the UIW RSS II features a 1" Hard-Dome Tweeter and 2 x 4.5" Polypropylene Woofer .
Frequency Response
Studio 2 55IW has a frequency range of 40-20kHz whereas UIW RSS II has a frequency range of 26-30kHz. With a minimum frequency of 26Hz, the UIW RSS II can go significantly deeper on the low side and provide stronger bass compared to the Studio 2 55IW's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the In-wall class in our database.
Low Frequency
In-wall Speakers
High Frequency
In-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Studio 2 55IW and UIW RSS II have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Studio 2 55IW sensitivity is rated at 88 dB and the UIW RSS II's is at 90 dB. This 2 dB difference makes the Definitive UIW RSS II a more sensitive speaker compared to JBL Studio 2 55IW, hence will play louder with the same amount of watts.
Sensitivity
In-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Studio 2 55IW can handle a max power of 250 watts RMS from the amp the whereas Studio 2 55IW has a max power handling value of 120 watts RMS , 130 watts less than the UIW RSS II.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Studio 2 55IW features Spring pst type posts and UIW RSS II has a Spring pst type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL Studio 2 55IW's and Definitive UIW RSS II's external dimensions. JBL Studio 2 55IW has external dimensions of 359.0 x 164.0 x 86.0mm ( 14.1250-inch x 6.4375-inch x 3.3750-inch) whereas Definitive UIW RSS II has external dimensions of 296.0 x 251.0 x 99.0mm ( 11.6250-inch x 9.8750-inch x 3.8750-inch) .
JBL Studio 2 55IW is 87mm narrower and 13mm less deeper than Definitive UIW RSS II but it is also 63mm taller.
What's in the Box of JBL Studio 2 55IW?
Here are the items that are included inside the box of Studio 2 55IW:
In-wall loudspeakerGrilleCloth scrimCut-Out TemplateInstruction Manual
What's in the Box of Definitive UIW RSS II?
Here are the items that come with the UIW RSS II:
In-wall/In-cieling bipolar speakerGrille7 Foam strips2 ScrewsPaint maskWall templateOwners ManualOnline Product Registration Card