In this review, we will be comparing two different type of speakers by JBL. JBL 4312G is a Bookshelf speaker whereas the 4367 is a Floor-standing speaker.
Let's have a brief look at the main features
of JBL 4312G and JBL 4367 first before getting into our more
detailed comparison.
JBL 4312G Key Specs
- 3-way Design
- 1" Dome Tweeter
- 5" Midrange
- 12" Pure Pulp Woofer
- 44-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 6ohms
- Power Range:10-200watts
- Weight:23.80kg
- Dimensions (H x W x D): 23-1/2" x 14-1/4" x 12" ( 597.0 x 362.0 x 305.0mm )
JBL 4367 Key Specs
- 2-way Design
- 3" Compression Driver Tweeter
- 15" Pure Pulp Woofer
- 30-40k Hz Frequency Response
- 94 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 300watts
- Weight:54.00kg
- Dimensions (H x W x D): 37-1/16" x 22-1/16" x 16-3/4" ( 941.0 x 560.0 x 425.0mm )
4312G and 4367 are members of JBL's Studio Monitor series of speakers. Below you can find the loudspeakers from this series.
What size room are the JBL 4312G and JBL 4367 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
JBL 4312G |
JBL 4367 |
| Near-field |
Good |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Good |
| Very Large Room |
No way |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the JBL 4312G and JBL 4367 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that 4312G is a 3-way design whereas the 4367 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
JBL 4312G |
JBL 4367 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
3-inch
|
|
Midrange
|
1 x 5-inch |
- |
|
Woofer
|
1 x 12-inch
|
1 x 15-inch
|
4312G features a 1" Magnesium/Aluminium Dome Tweeter , a 5" Midrange and 1 x 12" Pure Pulp Woofer with a Crossover frequency at 640Hz and 5000Hz. On the other hand, the 4367 features a 3" Teonex Compression Driver Tweeter and 1 x 15" Pure Pulp Woofer with a Crossover frequency at 700 Hz.
Frequency Response
4312G has a frequency range of 44-40k Hz whereas 4367 has a frequency range of 30-40k Hz. With a minimum frequency of 30Hz, the 4367 can go significantly deeper on the low side and provide stronger bass compared to the 4312G's min frequency of 44Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
4312G and 4367 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. 4312G sensitivity is rated at 90 dB and the 4367's is at 94 dB. This 4 dB difference makes the JBL 4367 a more sensitive speaker compared to JBL 4312G, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
4312G can handle a max power of 300 watts RMS from the amp the whereas 4312G has a max power handling value of 200 watts RMS , 100 watts less than the 4367.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
4312G features Binding post type posts and 4367 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare JBL 4312G's and JBL 4367's external dimensions. JBL 4312G has external dimensions of 597.0 x 362.0 x 305.0mm ( 23-1/2 x 14-1/4 x 12inch) whereas JBL 4367 has external dimensions of 941.0 x 560.0 x 425.0mm ( 37-1/16 x 22-1/16 x 16-3/4inch) .
JBL 4367 is clearly the larger of the two speakers. Its body is 198mm wider, 344mm taller and 120mm deeper than JBL 4312G.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the JBL 4312G is approximately 1104.1cm2 / 171.1inch2 and base area of the JBL 4367 is approximately 2380.0cm2 / 368.9inch2. The 4312G requires 54% less surface area than the 4367 which gives it a small advantage on placement in tight spaces.