In this review, we will be comparing Vintage Five and Evoke 30, two Passive Bookshelf speakers from Fyne Audio and Dynaudio.
Let's have a brief look at the main features
of Fyne Audio Vintage Five and Dynaudio Evoke 20 first before getting into our more
detailed comparison.
| Key Specs | Fyne Audio Vintage Five | Dynaudio Evoke 20 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | — | 1.1" |
|---|
| Woofer | — | 7" Magnesium Silicate Polymer |
|---|
| Frequency response | 46-38k Hz | 40-23k Hz |
|---|
| Sensitivity | 87 dB | 86 dB |
|---|
| Impedance | 8 ohms | 6 ohms |
|---|
| Power range | — | up to 180 watts |
|---|
| Weight | 6.17kg / 13.6lbs | 9.90kg / 21.8lbs |
|---|
| Dimensions (H x W x D) | 13.8" x 8.6" x 10.2"
350.5 x 218.4 x 259.1mm | 15" x 8.5" x 12.1"
380.0 x 215.0 x 343.0mm |
|---|
What size room are the Fyne Audio Vintage Five and Dynaudio Evoke 20 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Fyne Audio Vintage Five |
Dynaudio Evoke 20 |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Vintage Five and Evoke 30 are 2-way speakers.
| Driver |
Fyne Audio Vintage Five |
Dynaudio Evoke 20 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
x -inch
|
1 x 7-inch
|
Vintage Five features a " Tweeter and x " Woofer with a Crossover frequency at 1900 Hz. On the other hand, the Evoke 30 features a 1.1" Cerotar with Hexis Tweeter and 1 x 7" Magnesium Silicate Polymer Woofer with a Crossover frequency at 3200Hz.
Frequency Response
Vintage Five has a frequency range of 46-38k Hz whereas Evoke 30 has a frequency range of 40-23k Hz. With a minimum frequency of 40Hz, the Evoke 30 can go significantly deeper on the low side and provide stronger bass compared to the Vintage Five's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vintage Five is a 8 ohms speaker compared to the Evoke 30 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. Vintage Five sensitivity is rated at 87 dB and the Evoke 30's is rated at 86 dB. This 1 dB difference makes the Fyne Audio Vintage Five a more sensitive speaker compared to Dynaudio Evoke 20, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Vintage Five features Binding post type posts and Evoke 30 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Dynaudio Evoke 20's Binding post terminals
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Fyne Audio Vintage Five's and Dynaudio Evoke 20's external dimensions. Fyne Audio Vintage Five has external dimensions of 350.5 x 218.4 x 259.1mm (13.8 x 8.6 x 10.2inch) whereas Dynaudio Evoke 20 has external dimensions of 380.0 x 215.0 x 343.0mm (15 x 8.5 x 12.1inch).
Fyne Audio Vintage Five is 29.5mm shorter and 83.9mm less deeper than Dynaudio Evoke 20 but it is also 3.4mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Fyne Audio Vintage Five is approximately 565.9cm2 / 87.7inch2 and base area of the Dynaudio Evoke 20 is approximately 737.5cm2 / 114.3inch2. The Vintage Five requires 23% less surface area than the Evoke 30 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Fyne Audio Vintage Five weighs 6.17kg / 13.6lbs and the Dynaudio Evoke 20 weighs 9.90kg / 21.8lbs. This makes the Evoke 30 60% heavier than the Vintage Five.
Here is a comparison of how Vintage Five and Evoke 30's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Dynaudio Evoke 20?
Here are the items that come with the Evoke 30:
 Sensitivity |
87 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 High Frequency Response |
38k Hz
vs
23k Hz
|
Generates higher frequency |
 Height |
350mm
vs
380mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
565cm2
vs
737cm2
|
Takes less floor space |
 Woofer Size |
7 inches
vs
inches
|
Larger woofer |
|
Low Frequency Response |
40 Hz
vs
46 Hz
|
Generates deeper bass |
 Price per pair* |
4798USD
vs
4999USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Fyne Audio Vintage Five |
Dynaudio Evoke 20 |
| Brand |
Fyne Audio |
Dynaudio |
| Speaker Type |
Bookshelf speakers |
Floor-standing speaker |
| Sensitivity |
87 dB |
86 dB |
| Impedance |
8 ohms |
6 ohms |
| Frequency Response |
46-38k Hz |
40-23k Hz |
Drivers |
|
|
| Woofer Quantity |
|
1 |
| Woofer Size |
" |
7" |
| Woofer Composition |
|
Magnesium Silicate Polymer |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
1.1" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1900 Hz |
3200Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
350.5mm (13.8") |
380.0mm (15") |
| Width |
218.4mm (8.6") |
215.0mm (8.5") |
| Depth |
259.1mm (10.2") |
343.0mm (13.5") |
| Weight |
6.17kg (13.6lbs) |
9.90kg (21.8lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood veneer |
| Available Colors |
n/a |
Black |
| Mounting Bracket |
|
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
No |
Other |
|
|
| Parts Warranty |
|
5 Years (8 Years registered) |
| Labor Warranty |
|
5 Years (8 Years registered) |
A generation apart: Fyne Audio Vintage Five is the newer design, against a 2019 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass |
B |
Dynaudio Evoke 20 digs deeper - 40Hz against 46Hz. A subwoofer would even that out. |
| Amplifier needs |
evenly matched |
Similar sensitivity (87dB vs 86dB) - both want much the same power. |
| Amplifier match |
A |
Fyne Audio Vintage Five is the easier load at 8 ohms. |
| Size |
depends |
Fyne Audio Vintage Five is easier to place; Dynaudio Evoke 20 is bigger, which usually goes with fuller bass. Your room decides. |
| Price |
evenly matched |
Much the same money ($4,999 vs $4,798 a pair). |
A Fyne Audio Vintage Five
B Dynaudio Evoke 20
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 46Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Fyne Audio Vintage Five the better fit for near-field listening and a small room, and Dynaudio Evoke 20 for a mid-size room and a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.