In this review, we will be comparing Aria 936 and Aria 926, two Passive Floor-standing speakers by Focal
Let's have a brief look at the main features
of Focal Aria 936 and Focal Aria 926 first before getting into our more
detailed comparison.
Focal Aria 936 Key Specs
- 3-way Design
- 1" inverted dome Tweeter
- 6.5" Midrange
- 3 x 6.5" Flax Woofer
- 39-28k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-300watts
- Weight:29.09kg
- Dimensions (H x W x D): 1148.0" x 11-9/16" x 14-11/16"( 1148.0 x 294.0 x 374.0mm )
Focal Aria 926 Key Specs
- 3-way Design
- 1" inverted dome Tweeter
- 6.5" Midrange
- 2 x 6.5" Flax Woofer
- 6.5" Midrange
- 45-28k Hz Frequency Response
- 91.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:40-250watts
- Weight:25.00kg
- Dimensions (H x W x D): 1039.0" x 11-9/16" x 14-11/16"( 1039.0 x 294.0 x 374.0mm )
Aria 936 and Aria 926 are members of Focal's Aria series of speakers. Below you can find the loudspeakers from this series.
Focal Aria Series
History
What size room are the Focal Aria 936 and Focal Aria 926 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Focal Aria 936 |
Focal Aria 926 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Focal Aria 936 and Focal Aria 926 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Aria 936 and Aria 926 are 3-way speakers.
| Driver |
Focal Aria 936 |
Focal Aria 926 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6.5-inch |
1 x 6.5-inch |
|
Woofer
|
3 x 6.5-inch
|
2 x 6.5-inch
|
Aria 936 features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 3 x 6.5" Flax Woofer with a Crossover frequency at 260Hz and 3,100Hz. On the other hand, the Aria 926 features a 1" TNF Al/Mg inverted dome Tweeter , a 6.5" Midrange and 2 x 6.5" Flax Woofer with a Crossover frequency at 290Hz and 2,400Hz.
Frequency Response
Aria 936 has a frequency range of 39-28k Hz whereas Aria 926 has a frequency range of 45-28k Hz. With a minimum frequency of 39Hz, the Aria 936 can go significantly deeper on the low side and provide stronger bass compared to the Aria 926's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Aria 936 and Aria 926 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Aria 936 sensitivity is rated at 92 dB and the Aria 926's is at 91.5 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Aria 936 can handle a max power of 300 watts RMS from the amp the whereas Aria 926 has a max power handling value of 250 watts RMS, 50 watts less than the Aria 936.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Aria 936 features Binding post type posts and Aria 926 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Aria 936's and Focal Aria 926's external dimensions. Focal Aria 936 has external dimensions of 1148.0 x 294.0 x 374.0mm ( 45-3/16 x 11-9/16 x 14-11/16inch) whereas Focal Aria 926 has external dimensions of 1039.0 x 294.0 x 374.0mm ( 40-7/8 x 11-9/16 x 14-11/16inch) .
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Aria 936 is approximately 1099.6cm2 / 170.4inch2 and base area of the Focal Aria 926 is approximately 1099.6cm2 / 170.4inch2.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Aria 936 weighs 29.09kg / 64lbs and the Focal Aria 926 weighs 25.00kg / 55lbs. This makes the Aria 936 16% heavier than the Aria 926.
Here is a comparison of how Aria 936 and Aria 926's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Focal Aria 936?
Here are the items that are included inside the box of Aria 936:
Floorstanding loudspeakerGrilleBase4 Spike feet (pre-installed in base)4 Plastic feet4 ScrewsAllen-keyHex-toolUser Manual
What's in the Box of Focal Aria 926?
Here are the items that come with the Aria 926:
Floorstanding loudspeakerGrilleBase4 Spike feet (pre-installed in base)4 Plastic feet4 ScrewsAllen-keyHex-toolUser Manual
 Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
 Number of Woofers |
3
vs
2
|
More woofers |
|
Low Frequency Response |
39 Hz
vs
45 Hz
|
Generates deeper bass |
 Minimum Impedance |
2.9 ohms
vs
2.8 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Height |
1039mm
vs
1148mm
|
Easier to fit in smaller spaces |
 Price per pair* |
4798USD
vs
5998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Focal Aria 936 |
Focal Aria 926 |
| Brand |
Focal |
Focal |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-300 watts |
40-250 watts |
| Sensitivity |
92 dB |
91.5 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
2.8 ohms |
2.9 ohms |
| Frequency Response |
39-28k Hz |
45-28k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
2 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Flax |
Flax |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
inverted dome |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
6.5" |
| Crossover Frequency |
260Hz and 3,100Hz |
290Hz and 2,400Hz |
Physical Specs |
|
|
| Height |
1148.0mm (45.2") |
1039.0mm (40.9") |
| Width |
294.0mm (11.6") |
294.0mm (11.6") |
| Depth |
374.0mm (14.7") |
374.0mm (14.7") |
| Weight |
29.09kg (64lbs) |
25.00kg (55lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Glass/Leather |
MDF/Glass/Leather |
| Available Colors |
Gloss Black |
Gloss Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |