In this review, we will be comparing Aria 906 and RP-600M, two Passive Bookshelf speakers from Focal and Klipsch. Let's have a brief look at the main features
of Focal Aria 906 and Klipsch RP-600M first before getting into our more
detailed comparison.
What size room are the Focal Aria 906 and Klipsch RP-600M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Aria 906 and Klipsch RP-600M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Aria 906 and RP-600M are 2-way speakers.
| Driver |
Focal Aria 906 |
Klipsch RP-600M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
Aria 906 features a 1" TNF aluminum/magnesium Inverted Hard Dome Tweeter and 1 x 6.5" Flax Woofer with a Crossover frequency at 2800Hz. On the other hand, the RP-600M features a 1" Tractrix Horn Tweeter and 1 x 6.5" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
Aria 906 has a frequency range of 55-28k Hz whereas RP-600M has a frequency range of 45-25k Hz. With a minimum frequency of 45Hz, the RP-600M can go significantly deeper on the low side and provide stronger bass compared to the Aria 906's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Aria 906 and RP-600M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Aria 906 sensitivity is rated at 89.5 dB and the RP-600M's is at 96 dB. This 6 dB difference makes the Klipsch RP-600M a more sensitive speaker compared to Focal Aria 906, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Aria 906 can handle a max power of 120 watts RMS from the amp the whereas RP-600M has a max power handling value of 100 watts RMS, 20 watts less than the Aria 906.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-600M features Dual binding posts/bi-wire/bi-amp posts which make bi-amping or bi-wiring possible. Aria 906 has a Binding post which doesn't feature bi-amping/bi-wiring.
Focal Aria 906's Binding post terminals
Klipsch RP-600M's Dual binding posts/bi-wire/bi-amp terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Aria 906 and RP-600M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Klipsch RP-600M Tractrix horn-shaped Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Aria 906's and Klipsch RP-600M's external dimensions. Focal Aria 906 has external dimensions of 391.0 x 228.0 x 288.0mm ( 15-3/8 x 8-15/16 x 11-5/16inch) whereas Klipsch RP-600M has external dimensions of 399.0 x 202.0 x 301.0mm ( 15.7 x 7.9 x 11.8inch) .
Focal Aria 906 is 8mm shorter and 13mm less deeper than Klipsch RP-600M but it is also 26mm wider.
Below you can see the front view size comparison of Focal Aria 906 and Klipsch RP-600M in scale.
Comparison image of Focal Aria 906 and Klipsch RP-600M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Aria 906 is approximately 656.6cm2 / 101.8inch2 and base area of the Klipsch RP-600M is approximately 608.0cm2 / 94.2inch2. The Aria 906 requires 8% more surface area than the RP-600M which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Focal Aria 906 and Klipsch RP-600M on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Focal Aria 906 weighs 8.64kg / 19lbs and the Klipsch RP-600M weighs 7.30kg / 16.1lbs. This makes the Aria 906 18% heavier than the RP-600M.
Here is a comparison of how Aria 906 and RP-600M's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Focal Aria 906?
Here are the items that are included inside the box of Aria 906:
2 Bookshelf loudspeakers 2 Cloth grilles User manual
What's in the Box of Klipsch RP-600M?
Here are the items that come with the RP-600M:
2 Bookshelf loudspeakers2 Grilles (installed)8 Self-adhesive rubber feet4 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 High Frequency Response |
28k Hz
vs
25k Hz
|
Generates higher frequency |
 Height |
391mm
vs
399mm
|
Easier to fit in smaller spaces |
 Sensitivity |
96 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
45 Hz
vs
55 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Base Surface Area |
608cm2 (202x301mm)
vs
656cm2 (228x288mm)
|
Takes less floor space |
 Price per pair* |
369USD
vs
2198USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Focal Aria 906 |
Klipsch Reference Premiere RP-600M |
| Brand |
Focal |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-120 watts |
up to 100 watts |
| Sensitivity |
89.5 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4.6 ohms |
n/a |
| Frequency Response |
55-28k Hz |
45-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Flax |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Inverted Hard Dome |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2800Hz |
1500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
391.0mm (15.4") |
399.0mm (15.7") |
| Width |
228.0mm (9") |
202.0mm (8") |
| Depth |
288.0mm (11.3") |
301.0mm (11.9") |
| Weight |
8.64kg (19lbs) |
7.30kg (16.1lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Glass/Leather |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black |
Ebony, Walnut, Piano Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-28" |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |